Operating Instructions for EUFAB 7 Bar 2-Cylinder Foot Pump

Important Information

This guide provides essential instructions for the EUFAB 7 Bar 2-Cylinder Foot Pump (Art. 21048). Before using the device, ensure you have read all safety notes and checked the packaging for completeness. Keep the original packaging and purchase receipt for future reference.

Intended Use

The foot pump is designed for inflating car, motorbike, and bicycle tires, as well as filling air beds, rubber boats, and floating toys. It is not intended for commercial use or for use by children.

Scope of Delivery

• 1 x Foot-operated air pump
• 1 x Adapter for bicycle valve (Dunlop valve)
• 1 x Adapter for air beds, rubber boats, floating toys, etc.
• 1 x Ball adapter

Specifications

• Size (L x W x H): approx. 23.5 x 13.7 x 7.5 (21) cm
• Weight: approx. 1.120 kg
• Hose length: approx. 52 cm

Safety Notes

• Keep children away from the device.
• Do not manipulate or disassemble the device.
• Use only recommended accessories or replacement parts.
• Observe the maximum pressure permitted by the manufacturer of the tires or objects being inflated.
• Caution: The valve connection and the valve may be hot after use.

Operating Instructions

Setup

Place the foot pump on a level and stable surface. Press the foot lever down fully and release the securing hook.

Pumping

1. Select the appropriate adapter if necessary. For car or motorbike tires, no adapter is usually required.
2. Attach the valve connection directly to the valve (or use an adapter for other applications) and lock it by activating the lever.
3. Ensure the hose is not crushed or kinked.
4. Set the desired maximum pressure by rotating the manometer disk.
5. Operate the foot lever slowly and evenly, pressing it fully down and allowing it to rise completely.
6. Stop pumping when the set maximum pressure is reached.
7. After pumping car or motorbike tires, verify the pressure with a suitable tire pressure tester.

Storage

Press the foot lever down fully and engage the securing hook. Store in a dry place, away from moisture, oil, dust, dirt, high temperatures, and strong vibrations.

Maintenance

Clean the pump only with a soft, dry cloth; do not use aggressive cleaning agents or solvents. Lubricate the joints of the pump with a drop of bicycle oil.

Environmental Protection

Dispose of the device via recycling facilities or public/community collection points. The materials are recyclable.

Contact Information

EAL GmbH, Otto-Hausmann-Ring 107, 42115 Wuppertal, Germany. Phone: +49 (0)202 42 92 83 0. Email: [email protected]. Website: www.eal-vertrieb.com