Automotive / Bicycle Carriers
User Manual for EUFAB 11230ON and 11231ON Frame Holder
Quick guide for the EUFAB 11230ON and 11231ON frame holder. Includes installation steps, specifications, safety warnings, and maintenance tips for securely attaching your bicycle to a rack.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The EUFAB frame holder is designed to secure a bicycle to the U-bracket of a bicycle rack. Before use, ensure you have all parts: the frame mount, the appropriate rubber insert (25mm or 30mm), and the tension belt. Always verify the integrity of the product before installation and consult your bicycle rack's specific manual for additional securing requirements.
Product description
The frame holder consists of a knob screw, a pipe clamp, rubber inserts, and a frame mount with a tension belt. It is designed to adapt to different U-bracket diameters to provide a stable connection for your bicycle frame.
Specifications
- U-bracket diameter: 25 mm and 30 mm
- Bicycle frame diameter: 30 – 60 mm
- 11230 Length: approx. 10.5 cm
- 11230 Weight: 0.260 kg
- 11231 Length: approx. 30 cm
- 11231 Weight: 0.340 kg
Installation
- Open the pipe clamp by completely unscrewing the knob screw.
- Select the rubber insert (25mm or 30mm) that matches the diameter of your bicycle rack's U-bracket.
- Place the rubber insert around the U-bracket pipe.
- Position the pipe clamp over the insert and press it together.
- Insert the knob screw through both bore holes of the pipe clamp.
- Screw the frame holder onto the thread of the knob screw.
- Secure the bicycle frame using the tension belt.
- Finally, tighten the knob screw firmly.
Attention: Before driving, ensure the bicycle is secured according to your vehicle carrier manual (using tension belts, safety belts, etc.).
Safety precautions
- The warning triangle indicates safety-critical instructions.
- Keep children away from the device; it is not a toy.
- Do not manipulate or disassemble the frame holder.
- Use only accessories and spare parts recommended by the manufacturer.
- If the frame holder is visibly damaged, do not use it.
- Observe all safety specifications provided in the manual of your bicycle rack.
Maintenance and care
Clean the frame holder using a slightly moist, soft cloth and a mild cleaning agent. Do not use aggressive cleaning agents, solvents, or petrol. Ensure that no cleaning agents or liquids enter the tube of the frame holder. Store the device in a dry place.
Contact information
EAL GmbH, Otto-Hausmann-Ring 107, 42115 Wuppertal, Germany. Phone: +49 (0)202 42 92 83 0. Email: [email protected]. Website: www.eal-vertrieb.com
Official resources from the manual
Manufacturer information
EUFAB
Practical help
Common problems
Clamp does not fit the U-bracket.
Ensure you have selected the correct rubber insert (25mm or 30mm) for your specific U-bracket diameter.
Bike feels loose or unstable.
Ensure the knob screw is fully tightened and the tension belt is properly secured according to the vehicle carrier manual.
Before use
- Check package contents for all parts (frame mount, rubber inserts).
- Verify U-bracket diameter (25mm or 30mm).
- Ensure the frame holder is not visibly damaged.
- Read the bicycle carrier manual for additional securing requirements.
Specs in practice
- U-bracket diameter
- 25 mm or 30 mm (requires specific rubber insert).
- Bicycle frame diameter
- 30 – 60 mm.
- 11230 Length
- approx. 10.5 cm.
- 11231 Length
- approx. 30 cm.
Images and diagrams
- 1: Knob screw
- 2: Pipe clamp
- 3: Rubber insert 25mm
- 4: Rubber insert 30mm
- 5: Frame holder with tension belt
Model compatibility
- Not for commercial use.
- Not suitable for children or persons with limited mental abilities.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.