Tools / Saws
User Manual for Fieldmann FDK 200802-E Electrical Circular Saw
Quick guide for the Fieldmann FDK 200802-E electrical circular saw. Includes setup, operation, blade replacement, safety instructions, and troubleshooting.
Quick answers from the manual
Quick answer
- The Fieldmann FDK 200802-E is an electrical circular saw for straight cuts in wood and various construction materials. Always operate with both hands, ensure the blade is sharp, and disconnect from power before any adjustments or maintenance. p. 9, 20
Key actions
- Blade Replacement p. 20, 21
- Adjusting Cut Depth p. 21
First start
- Ensure the blade is correctly mounted, all moving parts move freely, and all screws are tightened before connecting to power. p. 21
Problems and fixes
Product does not start
Check power connection, power cord, or plug.
p. 24Maintenance and reset
- Keep engine vent holes clean and dust-free. Replace damaged blades immediately. p. 22
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power input | 800W | Power consumption | p. 23 |
| Speed | 4000rpm | No-load speed | p. 23 |
Where to find it in the PDF
- Machine Description p. 15
- Technical Data p. 23
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Fieldmann FDK 200802-E is an electrical circular saw designed for straight cuts in wood, plastics, laminates, and soft metals like aluminum. This manual provides essential safety, operation, and maintenance instructions. Always ensure the tool is disconnected from the power source before performing any adjustments or maintenance.
Machine Description
Key components of the saw include:
- Switch and Safety Switch: For starting and stopping the tool.
- Handles: Main handle and guiding handle for two-handed operation.
- Adjustments: Knobs for bevel adjustment, parallel guide adjustment, and cutting depth.
- Base: Circular-saw base for stability.
- Blade: Circular-saw blade with protective guard.
Operation and Adjustments
Before starting, ensure the blade is sharp and undamaged. Hold the saw with both hands during operation.
- Parallel Guide: Loosen the adjustment knob, insert the guide into the base, set the desired distance, and tighten the knob.
- Blade Replacement: Always disconnect from the power supply first. Use the flange wrench and Allen wrench to remove the blade stud, washer, and flange. Ensure the new blade's teeth direction matches the rotation arrow on the guard.
- Cut Depth Adjustment: Loosen the depth adjustment screw, move the base to the desired depth, and tighten the screw.
- Bevel Adjustment: Loosen the bevel adjustment screw, set the angle (0-45°), and tighten the screw.
Safety Instructions
Strict adherence to safety is required to prevent injury:
- Always wear eye and hearing protection.
- Never operate the saw without the blade guard.
- Keep hands away from the cutting area.
- Ensure the workpiece is firmly clamped.
- Do not use the saw for cutting firewood.
- Avoid kickback by supporting large panels and ensuring the blade is not pinched.
Cleaning and Maintenance
Regular maintenance ensures tool longevity:
- Keep engine vent holes clean and dust-free.
- Replace damaged blades immediately.
- If carbon brushes require replacement, contact an authorized service center.
- Store the tool in a dry place with constant temperature.
Manufacturer information
Fieldmann
Practical help
Common problems
Product does not start
Check power connection, power cord, or plug. If the issue persists, consult a specialist electrician.
Product does not reach full power
Check if the extension cord is suitable, ensure the power source voltage is sufficient, and clean the air vents.
Unsatisfactory cutting result
Replace a dull or damaged blade, or ensure the blade is suitable for the material being cut.
Excessive vibration or noise
Replace the blade if damaged or tighten any loose bolts and nuts.
Before use
- Check that the blade is sharp and undamaged.
- Ensure all moving parts move freely.
- Verify that all adjusting screws are tightened.
- Check that the blade guard closes properly.
- Ensure the power supply matches the tool's voltage (230V/50Hz).
Specs in practice
- Blade Diameter
- 140 mm
- Cutting capacity
- 45mm at 90°, 28mm at 45°
Images and diagrams
- Figure 1: Overview of parts including switch, handle, and adjustments.
- Figure 3: Attaching the parallel guide.
- Figure 5: Blade replacement procedure.
- Figure 6: Cut depth adjustment.
- Figure 7: Bevel adjustment.
Model compatibility
- Intended for household or hobby use only.
- Suitable for wood, plastics, thermoplastics, hard plastics, laminate, polyurethane foam boards, mineral wool insulation boards, cement bricks, cellular concrete, and non-ferrous metals.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.