findmanualpdf.com

User Manual for Fieldmann FZR 2070-E Electric Lawn Mower

Comprehensive user guide for the Fieldmann FZR 2070-E electric lawn mower. Includes assembly instructions, operation, maintenance, safety guidelines, and troubleshooting.

Quick answers from the manual

Quick answer

  • The Fieldmann FZR 2070-E is an electric lawn mower. To start it, connect the power cable, press and hold the safety button, and pull the switch lever towards the handle. p. 10

Key actions

  • Assemble the handle p. 8
  • Adjust cutting height p. 10
  • Replace the blade p. 13

First start

  • Connect to power, press safety button, and pull switch lever. p. 10

Problems and fixes

Mower does not start

Check power cable connection and power source.

p. 12
Excessive vibration

Check for bent motor shaft or unbalanced blade.

p. 12

Technical specifications

Parameter Value Meaning Pages
Power 1800 W Motor power consumption p. 11
Cutting Width 46 cm Blade length p. 11

Where to find it in the PDF

  • Assembly p. 8, 9
  • Operation p. 10
  • Technical Data p. 11
Table of contents

Manual images

Click an image to enlarge
Handle assembly (Fig 2.1, 2.2) Page 8 Grass catcher assembly (Fig 4.1) Page 8 Side discharge chute installation (Fig 5.1) Page 8 Mulching plug installation (Fig 5.2) Page 9 Start/Stop mechanism (Fig 6.1) Page 10 Self-propulsion lever (Fig 6.2) Page 10

Quick Guide from the Manual

The Fieldmann FZR 2070-E is an electric lawn mower designed for residential use. Before operating, ensure the power cable is undamaged and the lawn is clear of debris. Always wear protective gear, including hearing and eye protection. To start the mower, press and hold the safety button, then pull the switch lever towards the handle.

Assembly

Handle Assembly

Attach the lower handle section to the chassis using the provided screws and wing nuts (Fig 2.1). Connect the upper and lower handle sections using the quick-release levers (Fig 2.2). Secure the power cable to the handle using the plastic clips.

Handle assembly (Fig 2.1, 2.2)
Handle assembly (Fig 2.1, 2.2)

Grass Catcher

Attach the textile part of the grass catcher to the steel frame using the plastic loops (Fig 4.1). To install, lift the rear cover and hook the catcher into place.

Grass catcher assembly (Fig 4.1)
Grass catcher assembly (Fig 4.1)

Side Discharge and Mulching

To use side discharge, release the safety lock, lift the cover, and attach the side discharge chute (Fig 5.1). For mulching, lift the rear discharge cover and insert the mulching plug until it clicks into place (Fig 5.2).

Side discharge chute installation (Fig 5.1)
Side discharge chute installation (Fig 5.1)
Mulching plug installation (Fig 5.2)
Mulching plug installation (Fig 5.2)

Operation

Cutting Height Adjustment

Ensure the mower is turned off and the blade is stationary before adjusting. Use the central lever to select one of the 6 height positions, ranging from 25 mm to 75 mm.

Starting and Stopping

Connect the mower to a 230-240V power source. To start, press and hold the safety button (Fig 6.1, pos 1) and pull the switch lever towards the handle (Fig 6.1, pos 2). To stop, release the switch lever.

Start/Stop mechanism (Fig 6.1)
Start/Stop mechanism (Fig 6.1)

Self-Propulsion

To engage the self-propulsion function, press the propulsion lever towards the handle (Fig 6.2, pos 1). Release the lever to stop the propulsion.

Self-propulsion lever (Fig 6.2)
Self-propulsion lever (Fig 6.2)

Maintenance

Always disconnect the power supply before performing maintenance. Regularly check the blade for damage or dullness. If the blade needs replacement, use a wrench to loosen the blade bolt (turn counter-clockwise), replace the blade, and tighten the bolt (turn clockwise). Wear protective gloves during this process.

Troubleshooting

  • Mower won't start: Check if the extension cable is properly connected to the mower and the power source. Check the switch.
  • Uneven cutting: Check the lawn for unevenness or adjust the cutting height.
  • Mower doesn't mulch: Ensure the underside of the deck is clean; wet grass may be clogging the area.
  • Excessive vibration: Check if the motor shaft is bent or if the blade is unbalanced.

Manufacturer information

Fieldmann

Brand profile
Manufacturer website https://www.fieldmann.com

Practical help

Common problems

Mower does not start

Check the extension cable connection to the mower and the power outlet. Ensure the power source is active.

Uneven cutting

Check the lawn surface for unevenness. Adjust the cutting height to a higher position.

Mower does not mulch correctly

Wet grass may be stuck to the underside of the deck. Wait for the grass to dry before mowing.

Excessive vibration at high speeds

Stop the motor, disconnect power, and check for a bent motor shaft or unbalanced blade. Sharpen or replace the blade if necessary.

Before use

  • Inspect the power cable for damage or wear.
  • Clear the lawn of stones, branches, and other debris.
  • Ensure all nuts, bolts, and screws are tightened.
  • Check the blade for damage or excessive wear.
  • Wear hearing, eye, and respiratory protection.

Specs in practice

Cutting Width
46 cm
Cutting Height
25-75 mm (6 positions)
Grass Catcher Volume
60 L

Images and diagrams

  • Fig 2.1/2.2: Handle assembly and height adjustment.
  • Fig 4.1: Grass catcher assembly.
  • Fig 5.1: Side discharge chute installation.
  • Fig 5.2: Mulching plug installation.
  • Fig 6.1: Starting and stopping the mower.

Model compatibility

  • Requires 230-240V, 50Hz power supply.
  • Recommended to use with an RCD (Residual Current Device) with a maximum leakage current of 30mA.

Related manuals

Related manuals from the same brand or category.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.