Tools / Saws
User Manual for Fieldmann FDK 2003-E Double-Disc Circular Saw
Comprehensive user guide for the Fieldmann FDK 2003-E double-disc circular saw. Includes assembly instructions, blade replacement procedures, operating techniques, maintenance tips, and troubleshooting.
Quick answers from the manual
Quick answer
- The Fieldmann FDK 2003-E is a double-disc circular saw designed for cutting various materials. It features a 1050W motor, 125mm blades, and a lubrication system for soft metals. p. 15, 24
Key actions
- Attach the front grip using the provided nut. p. 17
- Use lubrication sticks when cutting soft metals like aluminum or copper. p. 15, 20
First start
- Unpack the tool, attach the front grip, ensure the blades are correctly installed, and verify the lower guard functions properly before connecting to power. p. 16, 17, 18
Problems and fixes
Excessive sparks
Check for damaged teeth, increase feed speed, or replace blades.
p. 22Maintenance and reset
- Keep blades clean and sharp. Use a solvent to remove resin or wood residue. Do not use gasoline. p. 18, 21
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 1050W | Power input | p. 24 |
| Speed | 5500 min-1 | No-load speed | p. 24 |
Where to find it in the PDF
- Safety Instructions p. 9, 10, 11, 12
- Assembly p. 16, 17
- Operation p. 18, 19, 20
- Maintenance p. 21, 22
Table of contents
Quick guide from the manual
This manual provides essential instructions for the safe and effective operation of the Fieldmann FDK 2003-E double-disc circular saw. Before using the tool, ensure you are wearing appropriate protective gear, including safety goggles, a mask, and gloves. Always disconnect the tool from the power supply before performing any maintenance, adjustments, or blade changes.
Product overview
The saw features a lubrication unit for cutting soft metals, a spindle lock for blade changes, a vacuum pipe for dust extraction, and a dual-blade system. Familiarize yourself with these components before operation.
Assembly
Front Grip: Attach the front grip to the saw and secure it with the provided nut.
Blade Installation/Removal: To change blades, press the spindle lock to secure the shaft. Use the provided wrench to loosen the nut, remove the washer, and carefully remove or install the blades (Face 1 and Face 2). Ensure the blades are correctly oriented as shown in the diagrams.
Operation
Cutting: Secure the workpiece firmly. Turn on the saw and allow it to reach full speed before engaging the material. Maintain a steady feed speed; excessive pressure can cause rough cuts and increase the risk of kickback. When cutting soft metals like aluminum or copper, use the provided lubrication sticks to prevent material from sticking to the blades.
Maintenance
Cleaning: Keep the blades clean and sharp. Remove resin or wood residue using a suitable solvent or hot water. Do not use gasoline. Lubrication: The tool's bearings are pre-lubricated and do not require additional maintenance under normal conditions.
Troubleshooting
If you encounter issues such as excessive sparks, rapid material wear, or blade breakage, check the condition of the blades (teeth sharpness) and adjust your feed speed. Ensure you are cutting parallel to the work surface.
Manufacturer information
Fieldmann
Practical help
Common problems
Excessive sparks
Check for damaged teeth, increase feed speed, or replace blades.
High material wear
Reduce feed speed, replace blades, or ensure the saw is held parallel to the work surface.
Blade breakage
Reduce feed speed or replace blades.
Before use
- Check if all parts are present
- Ensure the blade is sharp and clean
- Verify the lower guard moves freely
- Check power cord for damage
- Wear appropriate protective gear (goggles, mask, gloves)
Specs in practice
- Blade Diameter
- 125mm
- Max Cutting Depth
- 31mm
Images and diagrams
- Fig 1: Overview of components
- Fig 2: Front grip assembly
- Fig 3-8: Blade removal process
- Fig 9-13: Blade installation process
- Fig 14-19: Cutting techniques for different materials
Model compatibility
- Use only original blades designed for this tool
- Use lubrication sticks when cutting soft metals like aluminum or copper
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.