Tools / Drills
Fieldmann FDV 200502-E Hammer Drill User Manual
Comprehensive user guide for the Fieldmann FDV 200502-E hammer drill. Includes safety instructions, operation, technical specifications, and troubleshooting.
Quick answers from the manual
Quick answer
- The Fieldmann FDV 200502-E is a 500W hammer drill suitable for drilling into various materials including concrete, wood, and metal. It features variable speed control and a 13mm keyless chuck. p. 8, 9, 10
Key actions
- Switching between drilling and hammer mode p. 9
- Adjusting speed p. 9
First start
- Check power compatibility and attach auxiliary handle p. 5, 8
Problems and fixes
Product does not start
Check power connection and cable integrity.
p. 11Maintenance and reset
- Clean ventilation slots regularly p. 11
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power Input | 500W | Motor power | p. 10 |
| Speed | 0-3000 ot./min | Variable speed range | p. 10 |
Where to find it in the PDF
- Parts Diagram p. 3
- Technical Data p. 10
Table of contents
Manual images
Click an image to enlargeImportant Information from the Manual
The Fieldmann FDV 200502-E is a hammer drill designed for drilling into brick, concrete, wood, metal, ceramic, and plastic. Before using the device, ensure the power supply matches the voltage indicated on the tool (230V). Always use the auxiliary handle provided to maintain control and wear appropriate personal protective equipment, including eye and ear protection.
Product Description
The drill consists of the following main components:
- 1: On/Off switch
- 2: Lock-on button for On/Off switch
- 3: Speed regulator
- 4: Direction switch
- 6: Drilling/Hammer mode selector
- 7: Auxiliary handle
- 8: Depth gauge
- 9: Keyless chuck
- 10: Ventilation slots
- 11: Power cable
Operation
Drilling and Hammer Mode
The tool features a mode selector (6) to switch between standard drilling and hammer drilling:
- Drilling: Move the selector (6) to the right (drill icon) for drilling into wood or metal.
- Hammer Drilling: Move the selector (6) to the left (hammer icon) for drilling into concrete.
Speed Control
The speed is controlled by the pressure applied to the main On/Off switch (1). Applying less pressure results in lower speeds, allowing for a smooth start.
Chuck
The drill is equipped with a keyless chuck for quick tool changes. It supports drill bits and attachments up to 13 mm in diameter.
Safety Instructions
- Always use a detector to locate hidden electrical, water, or gas lines before drilling.
- Disconnect the power plug before changing drill bits or performing maintenance.
- Secure the workpiece in a vice or clamp for safety.
- Do not overload the motor.
- If the tool malfunctions, switch it off immediately and disconnect from the power source.
- Keep the tool away from moisture and rain.
Maintenance and Troubleshooting
Regularly clean the ventilation slots to prevent overheating. If the tool fails to start, check the power connection and the cable. If performance is low, ensure the extension cable is suitable and the power source is stable. If the tool produces excessive vibration, check if the drill bit is dull or damaged and tighten any loose screws.
Technical Specifications
- Power Supply: 230V / 50Hz
- Power Input: 500W
- Speed: 0-3000 rpm
- Protection Class: II
- Max Drilling Capacity: 13 mm
- Cable Length: 1.8 m
- Noise Level: 99dB(A)
Manufacturer information
Fieldmann
Practical help
Common problems
Product does not start
Check if it is plugged into the power outlet. Have the cable or plug checked by an electrician if damaged.
Product does not reach full power
Ensure the extension cable is suitable. Check the power source voltage. Clean the ventilation slots.
Unsatisfactory results
Replace worn or damaged drill bits. Ensure the bit is suitable for the material being drilled.
Excessive vibration or noise
Replace dull or damaged drill bits. Tighten any loose screws or nuts.
Before use
- Check the power cable and plug for damage.
- Ensure the power supply matches the 230V requirement.
- Attach the auxiliary handle securely.
- Use a detector to check for hidden wires or pipes in the wall.
- Wear safety goggles and ear protection.
- Ensure the workpiece is clamped securely.
Specs in practice
- Max Drilling Capacity
- Maximum diameter of 13 mm for drill bits.
- Protection Class II
- Double insulated device.
Images and diagrams
- Part 6 is the selector switch for drilling (right) and hammer drilling (left).
- Part 1 is the main trigger switch for operation and speed control.
- Part 4 controls the direction of rotation.
- Part 9 is the keyless chuck for bit installation.
Model compatibility
- Suitable for brick, concrete, wood, metal, ceramic, and plastic.
- Compatible with standard drill bits up to 13 mm.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.