User Manual for Fieldmann FDW 201650-E High-pressure Cleaner

Quick guide from the manual

The Fieldmann FDW 201650-E is a high-pressure cleaner designed for outdoor household use. It is intended for use with cold water only. Before first use, it is critical to bleed the gun to remove trapped air. Always ensure the power switch is in the OFF position before connecting the water supply or accessories.

Device description

The package includes the main unit, water gun, high-pressure hose (5m), jet extension, shampoo container, car brush, surface cleaner, and various nozzles. The unit features an automatic on/off switch that activates the motor only when the trigger is squeezed.

Assembly instructions

Follow these steps to assemble the unit:

• Gun holder and accessories: Attach the gun holder and other accessories to the machine body as shown in the diagrams.
• Handle and hose hook: Mount the handle and hose hook onto the machine body and fasten with screws.
• Inlet filter: Remove the protective cover from the inlet thread and screw on the filter. Failure to install the filter voids the warranty.
• Hose connection: Connect the garden hose to the quick coupling (included) and insert it into the inlet terminal until a click is heard.
• Water gun: Insert the jet attachment into the water gun and turn 90 degrees to lock.
• High-pressure hose: Connect the high-pressure hose to the outlet thread on the machine.

Operating instructions

To start the cleaner:

1. Ensure the power switch is in the OFF position.
2. Connect the water supply and fully open the water inlet valve.
3. Bleed the gun: Connect the hose and squeeze the trigger for approximately one minute before turning on the power to remove excess air.
4. Set the ON/OFF switch to the ON position and press the trigger to begin cleaning.

The adjustable nozzle allows for various spray patterns. Always test the spray in an open area first.

Maintenance and storage

• Cleaning: Check the inlet filter periodically for deposits and clean it to maintain performance.
• Shutting down: Turn the unit OFF, turn off the water supply, and discharge remaining pressure by squeezing the trigger.
• Winterizing: After disconnecting the water supply, run the unit for 2-3 seconds to clear remaining water from the pump. Store in an area above 0 °C.

Technical specifications

The unit operates at 230-240 V, 50 Hz with a power input of 1650 W. The rated pressure is 90 bar (9 MPa), with a maximum pressure of 135 bar (13.5 MPa). The rated flow is 5 l/min, and the maximum water inlet temperature is 40 °C.

Safety information

Never point the high-pressure nozzle at people, animals, or electrical appliances. Do not use the unit if the supply cord or important parts like safety devices or high-pressure hoses are damaged. Always wear safety glasses and ear protection during operation.