Music / Guitar Effects
Owner's Manual for Flamma FC14 Analog Chorus Pedal
Quick guide for the Flamma FC14 Analog Chorus Pedal. Learn about power requirements, control layout, and technical specifications.
Table of contents
Quick Guide
The Flamma FC14 is a compact analog chorus pedal. To operate, connect a 9V DC center-negative power supply to the DC IN port. Connect your instrument to the INPUT jack and your amplifier or next pedal to the OUTPUT jack. Use the footswitch to engage or bypass the effect.
Precautions
- Power Supply: Use only a 9V DC power supply with center-negative polarity.
- Environment: Do not use near water or heat sources such as radiators or stoves.
- Maintenance: Clean only with a dry cloth.
- Safety: Do not defeat the safety purpose of polarized or grounding-type plugs.
Layout and Controls
The pedal features the following controls and connections:
- Footswitch: Press to turn the pedal on or off.
- LED Indicator: Indicates the On or Off status of the pedal.
- DC IN: Port for connecting the 9V DC power supply.
- INPUT: 1/4" mono audio jack for your instrument.
- OUTPUT: 1/4" mono audio jack for your amplifier or next device.
- LEVEL: Rotate to adjust the volume level of the chorus effect.
- DEPTH: Rotate to adjust the depth of the chorus effect.
- RATE: Rotate to adjust the speed of the chorus effect.
Specifications
- Input: 1/4" mono audio jack (impedance: 470k ohms)
- Output: 1/4" mono audio jack (impedance: 470 ohms)
- Power Requirements: 9V DC (center negative)
- Current Draw: 9mA
- Dimensions: 47mm (D) x 83mm (W) x 52mm (H)
- Weight: 160g
Practical help
Common problems
Pedal does not turn on
Ensure you are using a 9V DC power supply with center-negative polarity.
No sound output
Check that the instrument cable is connected to the INPUT jack and the amplifier cable is connected to the OUTPUT jack. Ensure the pedal is engaged (LED is on).
Before use
- Verify the power supply is 9V DC, center negative.
- Connect instrument cable to the INPUT jack.
- Connect amplifier cable to the OUTPUT jack.
- Ensure the pedal is placed on a stable surface.
Specs in practice
- Power Requirements
- Requires 9V DC power with center-negative polarity.
- Input Impedance
- 470k ohms, suitable for standard electric guitar pickups.
- Current Draw
- 9mA, indicating low power consumption.
Images and diagrams
- The layout diagram illustrates the top-down view of the pedal.
- It identifies the footswitch, LED indicator, DC input, and audio jacks.
- It highlights the three control knobs: LEVEL, DEPTH, and RATE.
Model compatibility
- Requires standard 1/4 inch mono audio cables.
- Designed for use with 9V DC center-negative power adapters.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.