Documents / Terms Conditions
Owner's Manual for Flamma FS01 Drum Machine and Phrase Loop Pedal
Quick guide for the Flamma FS01 pedal, covering looper and drum machine operation, modes, rhythm selection, and technical specifications.
Table of contents
Quick guide from the manual
The Flamma FS01 is a combined drum machine and phrase looper pedal. It features 20 minutes of looping capacity, 121 total rhythm patterns across 11 genres, and three operation modes: Looper, Drum, and Mix (L+D).
Device layout
The pedal features a footswitch for control, a TAP tempo button, and dedicated knobs for LOOPER volume, DRUM volume, GENRE selection, and PATTERN selection. It includes dual 1/4 inch mono inputs and outputs. The footswitch LED indicates status (Red for recording/dubbing, Blue for playback/stopped).
Operation modes
- Looper mode: Press the footswitch to record (REC), press again to playback (PLAYBACK), press again to add layers (DUB), or hold to undo/redo. Double press to stop, or hold to delete the current loop.
- Drum machine mode: Use the GENRE and PATTERN knobs to select a rhythm. Set the tempo by tapping the TAP button. Press the footswitch to start or stop the drum machine.
- Mix mode (L+D): Allows simultaneous use of the looper and drum machine. The drum machine tempo is set before recording. The looper operation remains the same as in Looper mode.
Safety and maintenance
Use only a 9V DC power supply with a center-negative polarity. Do not use the device near water or heat sources. Clean the unit only with a dry cloth. It is recommended to place the FS01 as the last pedal in your effects chain.
Technical specifications
- Input: 2 x 1/4 inch mono audio jack (4.7M ohms impedance)
- Output: 2 x 1/4 inch mono audio jack (100 ohms impedance)
- Power supply: 9V DC, 300mA, center negative
- Dimensions: 86.6 x 125 x 60 mm
- Weight: 0.371 kg
Practical help
Common problems
Looper or drum machine not starting
Ensure the power supply is 9V DC, 300mA, center negative and correctly connected.
Unwanted noise or interference
Place the FS01 as the last pedal in your effects chain to avoid affecting other pedals.
Cannot change drum tempo during play
The tempo of the drum machine cannot be changed during play in L+D mode; set it before starting.
Before use
- Verify the power adapter is 9V DC, 300mA, center negative.
- Ensure the pedal is placed at the end of the effects chain.
- Connect instruments to the appropriate INPUT-L (MONO) or INPUT-R jacks.
- Select the desired genre and pattern before starting the drum machine.
Specs in practice
- Input Impedance
- 4.7M ohms, designed for high-impedance instrument signals.
- Output Impedance
- 100 ohms, suitable for standard amplifier or mixer inputs.
- Current Draw
- 300mA; ensure your power supply can provide at least this amount.
Model compatibility
- Use 1/4 inch mono unbalanced cables for connections.
- For mono setups, use the L (MONO) input and output jacks.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.