Music / Instruments
Owner's Manual for Flamma FG200 Intelligent Combined Effects Pedal
Quick guide for the Flamma FG200 effects pedal, covering device connections, operation modes, effect modules, drum machine, tuner, and technical specifications.
Table of contents
Quick guide from the manual
The Flamma FG200 is an intelligent combined effects pedal featuring seven effects modules, 40 preset slots, integrated tuner, drum machine, and Bluetooth playback. This document provides essential instructions for safe operation, device connectivity, and parameter adjustment.
Safety and Maintenance
- Power Adapter: Use only manufacturer-specified adapters compliant with local regulations. Unplug during thunderstorms or long periods of inactivity.
- Battery Care: Do not charge if the device is wet. Use the designated charger and charge within specified temperature ranges. Stop charging immediately if the battery emits odors or abnormal sounds. Do not disassemble or modify the battery.
- Cleaning: Avoid abrasive powders, alcohol, solvents, or detergents.
Device Connections
Standard Connection: Connect your instrument to the INPUT jack and your amplifier, audio device, or other pedals to the OUTPUT jack. Headphones can be connected to the PHONES jack.
OTG Connection: Connect the device to a smartphone or tablet using a USB cable and an OTG adapter (sold separately) for digital recording. Monitoring is supported via the OUTPUT or headphone jacks.
Operation Modes
- PRESET Mode: The default startup mode. Displays 'P' and the preset number. Use footswitches A/B/C/D to switch presets. Use combinations A+B or C+D to navigate preset groups.
- LIVE Mode: Displays 'L' and the preset number. Each footswitch (A/B/C/D) independently controls a specific module.
- Switching Modes: Press footswitches B + C simultaneously to toggle between modes.
Additional Functions
- Drum Machine: Press and hold B + C to enter. Use A/B to switch types, C to set BPM, and D to toggle on/off.
- Tuner: Press and hold A + B in any mode to activate.
- Bluetooth Playback: Enable via the FLAMMA app. The screen indicator flashes during pairing and remains solid when connected.
Technical Specifications
- Battery: 2000mAh, up to 6 hours life, ~2.5 hours charging time.
- Charging: DC 5V/2A, supports USB-C to USB-A cables only.
- Inputs/Outputs: 6.35mm Input (2MΩ), 6.35mm Output (100Ω), 3.5mm Headphone Output (32Ω).
- USB: USB-C for charging or OTG recording.
- Bluetooth: Version 5.0.
Practical help
Common problems
Battery charging issues
Ensure you are using the designated charger and that the device is not wet. If the battery emits odors or sounds, stop charging immediately and contact support.
Bluetooth pairing failure
Ensure the FLAMMA app is used to enable Bluetooth. The indicator will flash during pairing and remain solid when connected.
Poor sound quality or noise
Check the noise gate threshold in the GATE module. Ensure cables are not damaged and the power adapter is compliant.
Before use
- Inspect the power adapter plug and cable for damage.
- Ensure the power socket is accessible for immediate disconnection.
- Verify that the voltage specification matches your power supply network.
- Charge the device fully before first use if necessary.
Specs in practice
- Input Impedance (2MΩ)
- High impedance input suitable for guitar pickups to maintain signal integrity.
- Charging Standard (DC 5V/2A)
- Requires a 5V/2A power source; only supports USB-C to USB-A cables.
- Battery Life (Up to 6 hours)
- Estimated operational time on a full charge.
Model compatibility
- Compatible with FLAMMA mobile app and PC software.
- Supports third-party IR loading (9 slots).
- USB-C port supports OTG recording.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.