Documents / Warranty Safety
User Manual for FlinQ Jig Saw 18V
Quick guide for the FlinQ Jig Saw 18V, covering setup, blade installation, battery management, cutting adjustments, and safety instructions.
Table of contents
Quick guide from the manual
This document provides essential instructions for the safe and correct operation of the FlinQ Jig Saw 18V. It covers initial setup, battery handling, blade installation, and operational adjustments. Always read the full safety instructions before use.
Device description
The FlinQ Jig Saw 18V is a cordless tool designed for straight, curved, and mitre cuts (up to 45°) in wood, plastic, and light metal. It features a speed control dial, pendulum action selector, and an adapter for external dust extraction.
Battery and charging
The device uses a 20V battery pack (not included). To check the charge level, press the button on the battery; 4 LEDs indicate maximum charge, while 1 LED indicates low charge. Charge the battery using a compatible FlinQ charger (FQC8516 or FQC8517). Red LED indicates charging, green indicates fully charged.
Installing the saw blade
- Switch off the device and remove the battery.
- Turn the chuck release as far as possible and hold it.
- Insert the T-shank saw blade into the chuck, ensuring the back of the blade sits in the guide roller notch.
- Release the chuck and ensure the blade is secure with teeth pointing in the cutting direction.
Operation and settings
- Cutting speed: Use the speed control dial (1-6) to adjust oscillation speed.
- Pendulum action: Set the selector to one of 4 positions, ranging from no pendulum motion to large pendulum motion.
- Bevel cutting: Use the Allen key to loosen the hexagon socket screws, adjust the base plate to the desired angle (-45° to 45°), and re-tighten.
- Dust extraction: Disable the dust blower function before connecting an external extraction system to the nozzle.
Safety and maintenance
Always wear protective gear, including safety glasses, ear protection, and a dust mask. Keep venting slots clear to prevent motor overheating. Before and after use, inspect the tool for wear. Store in a dry, frost-free place inaccessible to children. For repairs, contact an authorized service center.
Manufacturer information
FlinQ
Practical help
Common problems
Saw blade does not eject
Hold the chuck release and manually pull the blade out of the chuck.
Battery charging issues
If red and green LEDs flash, the battery is defective. If red LED flashes, the battery is too cold or too warm.
Device does not start
Ensure the battery is fully inserted and the switch lock is disengaged.
Before use
- Ensure the battery is charged to 40-60% for storage or fully charged for use.
- Select the correct saw blade for the material (wood or metal).
- Check that the saw blade is securely locked in the chuck.
- Wear appropriate personal protective equipment (safety glasses, gloves, ear protection).
- Ensure the work piece is securely clamped.
Specs in practice
- Motor voltage
- 20V (requires compatible FlinQ battery pack).
- No Load Speed
- 0-3000 rpm, adjustable via speed control dial.
- Stroke length
- 20 mm, determines the depth of the cutting action.
Model compatibility
- Only use FlinQ battery packs FQC8516 (2.0 Ah) or FQC8517 (4.0 Ah).
- Compatible with T-shank saw blades.
- Not suitable for commercial use.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.