Globo 15469-8H NORMY Pendant Light
Installation and operation guide for the Globo 15469-8H NORMY pendant light, featuring 8 E27 sockets for versatile lighting solutions.
Table of contents
Product Overview
The Globo 15469-8H NORMY is a stylish pendant light fixture designed for indoor use. It features eight individual light points, providing ample illumination for dining areas, living rooms, or large spaces. The fixture is compatible with E27 bulbs, allowing for customization of light intensity and color temperature based on your preference.
Technical Specifications
- Model: 15469-8H
- Socket Type: 8 x E27
- Maximum Wattage: 60W per socket
- Voltage: 230V~ 50Hz
Safety Instructions
Before beginning any installation work, it is mandatory to switch off the power supply at the main circuit breaker to prevent the risk of electric shock. Ensure that the electrical installation is performed by a qualified professional if you are not experienced with wiring. Do not exceed the maximum wattage specified for the bulbs to avoid overheating and potential fire hazards.
Installation Steps
Follow these steps to install your pendant light securely:

- Ensure the power is turned off at the mains.
- Mount the ceiling bracket securely to the ceiling structure.
- Connect the electrical wires from the ceiling to the terminal block on the fixture, ensuring correct polarity (L for Live, N for Neutral, and Ground connection).
- Attach the main fixture housing to the ceiling bracket using the provided screws.
- Install the glass shades onto the sockets.
- Insert the E27 bulbs into each socket.
- Restore power at the circuit breaker to test the light.
Maintenance and Care
To keep your pendant light in optimal condition, clean the fixture regularly with a soft, dry cloth. Avoid using abrasive cleaners or chemicals that may damage the finish. If a bulb burns out, ensure the power is switched off and the bulb has cooled down completely before replacing it with a new one of the same type and wattage.
Troubleshooting
If the light fails to turn on, first check the circuit breaker to ensure power is restored. Verify that all bulbs are screwed in correctly and are not defective. If the issue persists, inspect the wiring connections at the terminal block to ensure they are secure and properly seated. If you suspect a fault in the fixture itself, contact a qualified electrician or the manufacturer for assistance.
Disposal
When the product reaches the end of its service life, do not dispose of it with household waste. Please follow local regulations regarding the disposal of electrical and electronic equipment to ensure environmentally friendly recycling.
Manufacturer information
Globo Lighting
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.