Power / Batteries & Chargers
User Manual for Hama 10000mAh Power Pack
Quick guide for the Hama 10000mAh Power Pack. Learn how to charge the power bank, charge your devices, interpret LED indicators, and follow safety guidelines.
Table of contents
Quick guide from the manual
This Hama Power Pack is designed to charge mobile devices. Before first use, ensure the power pack is fully charged. The device features LED indicators to show the current capacity.
Safety Instructions
- Use the product only for its intended purpose.
- Keep the product away from dirt, moisture, and overheating; use only in dry environments.
- Do not use near heat sources or in direct sunlight.
- Keep out of reach of children.
- Do not drop or expose to major shocks.
- Do not attempt to repair or service the device yourself.
- Do not incinerate the battery or the product.
Charging the Power Pack
Connect the enclosed USB-A to USB-C cable to the USB-C input (IN 5V/2A) on the power pack and a suitable USB charger. Alternatively, you can use the micro-USB port (IN 5V/2A). The charging process starts and ends automatically.
LED Capacity Indicators: Each LED corresponds to 25% capacity. If all four LEDs light up, the power pack is fully charged.
Charging Devices
Connect the USB cable to the power pack's USB output (OUT 5V/3A) and your device. The charging process starts automatically. To stop charging and turn off the power pack, press the button twice.
Care and Maintenance
Clean the product with a slightly damp, lint-free cloth. Do not use aggressive cleaning agents.
Technical Data
- USB-C Input: 5V / 2A
- Micro-USB Input: 5V / 2A
- USB-A Output 1 & 2: 5V / 3A
- USB-C Output: 5V / 3A
- Total Output: 5V / 3A (max)
- Battery Type: 3.7V Li-Po (High Density)
Manufacturer information
Hama GmbH & Co KG
Practical help
Common problems
Power pack not charging
Ensure you are not charging via a PC/notebook USB port, as currents may be insufficient or damaging. Use a dedicated USB wall charger.
Slow charging of connected devices
Do not charge devices simultaneously on both USB and USB-C outputs, as this significantly reduces the charging current.
Power pack turns off unexpectedly
The power pack switches off automatically if no device is connected or if the charging process is complete.
Before use
- Fully charge the power pack before first use.
- Check that your device's total current consumption does not exceed 3000 mA.
- Use the provided USB-A to USB-C cable or a compatible cable for your device.
Specs in practice
- Input (USB-C/Micro-USB)
- 5V / 2A
- Output (USB-A/USB-C)
- 5V / 3A
- Total Output
- 5V / 3A (max)
- Battery Type
- 3.7V Li-Po (High Density)
Images and diagrams
- LED indicators: Each LED represents 25% capacity. 4 LEDs = 100%.
- Button: Press once to check capacity/turn on. Press twice to turn off.
Model compatibility
- Compatible with most USB-powered devices (smartphones, etc.).
- Not suitable for charging via PC/notebook USB ports.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.