Tools / Measuring Tools
Operating Instructions for Hilti PM 2-PG Point Laser
Quick guide for the Hilti PM 2-PG point laser. Includes safety instructions, battery handling, laser safety, and maintenance tips.
Quick answers from the manual
Quick answer
- The Hilti PM 2-PG is a Class 2 point laser measuring tool. Always check accuracy before use and keep the laser exit window clean. p. 1
Key actions
- Check accuracy before important measurements. p. 1
Problems and fixes
Inaccurate measurements
Check accuracy before important measurements, especially after the device has been dropped or subjected to mechanical stress.
p. 1Maintenance and reset
- Keep the laser exit window clean to avoid measurement errors. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Laser Class | 2 | IEC/EN 60825-1:2014 compliant | p. 1 |
Where to find it in the PDF
- Safety and FCC/IC information p. 1, 2
Table of contents
Important information from the manual
This document provides essential safety and operational guidelines for the Hilti PM 2-PG point laser. It is intended to ensure safe and accurate operation of the device. Always check the accuracy of the product before use and several times during use, especially if the device has been dropped or subjected to mechanical stress.
Safety instructions
General safety
- Keep your workplace clean and well-lit.
- Do not operate the product in explosive atmospheres.
- Keep children and other persons clear when the product is in use.
- Do not use the measuring tool in the vicinity of medical devices.
Laser safety
- The product corresponds to Laser Class 2 in accordance with IEC/EN 60825-1:2014.
- Do not look directly into the light source.
- If you inadvertently look into the laser beam, immediately close your eyes and move your head clear of the laser beam.
- Do not aim the laser beam at persons.
- Keep the laser exit window clean to avoid measurement errors.
Battery handling
- Remove the batteries from the product if it is to remain unused for a lengthy period of time.
- Do not mix old and new batteries. Always replace all batteries at the same time.
- Do not mix batteries of different makes or types.
- Ensure correct polarity when replacing batteries.
- Do not allow batteries to overheat and do not expose them to fire.
Maintenance and accuracy
The measuring tool is designed for tough jobsite conditions, but it must be handled with care. Check the accuracy of the product before use and several times during use. If the product is brought into a warm environment from very cold conditions, or vice-versa, allow it to become acclimatized before use.
Electromagnetic compatibility
Although the product complies with the strict requirements of the applicable directives, Hilti cannot entirely rule out the possibility of interference to the product caused by powerful electromagnetic radiation, possibly leading to incorrect operation.
Further information
For more information on operation, technology, environment and recycling, follow this link: qr.Hilti.com/manual/?id=2341493
Official resources from the manual
Manufacturer information
Hilti Corporation
Practical help
Common problems
Laser beam not visible
Check battery status and ensure the laser exit window is clean.
Inaccurate measurements
Check accuracy before important measurements, especially after the device has been dropped or subjected to mechanical stress.
Before use
- Check battery levels
- Ensure laser exit window is clean
- Verify device accuracy
- Secure the measurement area
Specs in practice
- Laser Class 2
- Safe for normal use, but do not stare directly into the beam.
Model compatibility
- Do not use in the vicinity of medical devices.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.