Furniture / Home Furnishing
Assembly Instructions for Home Decorators Collection Nova 24"W Mirror
Quick guide for the Home Decorators Collection Nova 24"W Mirror. Includes assembly steps, safety warnings, maintenance tips, and troubleshooting.
Quick answers from the manual
Quick answer
- To install the Nova 24"W Mirror, measure the distance between the keyholes on the back, drill holes in the wall, insert the plastic plugs, and screw in the provided screws, leaving 5/16 inches exposed to hang the mirror. p. 7
Key actions
- Measure and drill holes p. 7
- Install screws p. 7
Problems and fixes
The mirror is not level
Measure the hole well and re-drill.
p. 8Show 3 more answers Show less
Maintenance and reset
- Dust frequently with a clean, soft and dry cloth. Wipe away any water or liquid spills on the mirror immediately. p. 8
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Weight limit | 50 lbs | Maximum weight capacity | p. 2 |
Where to find it in the PDF
- Assembly Instructions p. 7
- Safety Information p. 2
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides assembly and maintenance instructions for the Home Decorators Collection Nova 24"W Mirror. For any questions, missing parts, or issues, please contact Customer Service at 1-800-998-7021 (Monday–Friday 8 a.m. – 7 p.m. EST, Saturday 9 a.m. – 6 p.m. EST). The product is designed to hold a maximum of 50 lbs.
Safety Information
- Danger: Keep small parts away from children during assembly. Exceeding the 50 lbs weight limit may damage the product or cause injury.
- Warning: Adult assembly is required. Use only on a flat, level surface. Do not over-tighten connectors (screws, bolts, etc.) as this can cause damage. Do not stand, step, or climb on the unit.
- Caution: Blot spills quickly and wash with mild soap and warm water. Do not use abrasive cleansers.
Pre-assembly
Before beginning, ensure you have the necessary tools and hardware. Check all packing materials carefully for small parts that may have come loose during shipment.
Tools Required
- Electric drill with #2 drill bit
- Phillips screwdriver
- Tape measure
- Safety goggles
- Level
Hardware Included
- 2 x Screws (AA)
- 2 x Plastic plugs (BB)
Assembly
- Measure and Drill: Measure the distance between the keyholes on the back panel of the mirror. Drill holes in the wall at the same distance.
- Insert Plugs: Place the plastic plugs (BB) into the pre-drilled holes in the wall.
- Install Screws: Rotate the screws (AA) into the plastic plugs (BB), leaving 5/16 inches of the screw exposed to hang the mirror.
- Hang Mirror: Carefully hang the mirror (A) on the installed screws.
Maintenance and Care
- To maintain the furniture finish, avoid placing the mirror in direct sunlight.
- Avoid exposing the mirror to extreme temperatures by installing it away from heat and air vents.
- Dust frequently with a clean, soft, and dry cloth.
- Wipe away any water or liquid spills immediately with a clean, soft, and dry cloth.
Troubleshooting
If the mirror is not level, the hole on the wall is likely not level. Measure the hole distance again and re-drill.
Manufacturer information
Home Decorators Collection
Practical help
Common problems
The mirror is not level
Measure the hole distance again and re-drill.
Before use
- Check for all parts and hardware
- Ensure the wall surface is flat and level
- Gather required tools: drill, #2 bit, screwdriver, tape measure, level, safety goggles
Show more Show less
Specs in practice
- Weight limit
- 50 lbs maximum
Images and diagrams
- The assembly diagram shows measuring the distance between keyholes on the back of the mirror before drilling into the wall.
- The diagram illustrates leaving 5/16 inches of the screw exposed to hang the mirror.
Model compatibility
- Product must be used on a flat, level surface.
Manual page author
Michael Turner
Technical manual editor