Assembly Instructions for Home Decorators Collection Ryan 24 in. Rectangular Metal Framed Mirror

Quick guide from the manual

This document provides assembly and installation instructions for the Home Decorators Collection Ryan 24 in. Rectangular Metal Framed Mirror. The mirror is designed to hold a maximum of 50 lbs. Ensure you have all necessary tools and hardware before beginning the installation. If you encounter any issues, contact Home Decorators Collection Customer Service at 1-800-998-7021.

Safety information

• Weight limit: The product is designed to hold 50 lbs. Exceeding this limit may cause injury or damage.
• Assembly: Adult assembly is required. Keep small parts away from children during assembly to prevent choking hazards.
• Installation: Use only on a flat, level surface. Do not over-tighten connectors.
• Chemical warning: This product may expose you to chemicals including formaldehyde.

Pre-assembly

Before starting, ensure you have the following tools (not included):

• Electric drill with #2 drill bit
• Phillips screwdriver
• Tape measure
• Safety goggles
• Level

Hardware included:

• 2 Screws (AA)
• 2 Plastic plugs (BB)

Assembly

1. Prepare the wall: Measure the distance between the keyholes on the back panel of the mirror. Drill holes in the wall at the same distance. Use a stud finder if you cannot see solid wood framing behind the drywall to ensure a strong attachment.
2. Insert plugs: Place the plastic plugs (BB) into the pre-drilled holes in the wall.
3. Install screws: Rotate the screws (AA) into the plastic plugs (BB), keeping 5/16 inches of the screw exposed outside the wall.
4. Hang the mirror: Carefully hang the mirror (A) onto the screws.

Care and cleaning

• Dust frequently with a clean, soft, and dry cloth.
• Wipe away any water or liquid spills immediately with a clean, soft, and dry cloth.
• Avoid placing the mirror in direct sunlight to maintain the finish.
• Install away from heat and air vents to avoid extreme temperatures.

Troubleshooting

If the mirror is not level, measure the hole placement on the wall again and re-drill as necessary.

Warranty

This product is backed by a limited lifetime warranty covering defects in materials or workmanship. The warranty excludes incidental/consequential damages, misuse, abuse, or normal wear and tear. Proof of purchase is required for all claims.