Furniture / Bathroom Furniture
Assembly Instructions for Home Decorators Collection Nova 37 Inch Single Vanity
Quick guide for assembling and maintaining the Home Decorators Collection Nova 37 Inch Single Vanity. Includes installation steps, care instructions, and troubleshooting tips.
Quick answers from the manual
Quick answer
- This manual provides assembly instructions for the Nova 37 Inch Single Vanity, including safety warnings, installation steps for the backsplash, and maintenance guidelines. p. 1, 6
Key actions
- Position the vanity and ensure it is level. p. 6
- Apply sealant to the backsplash. p. 6
Problems and fixes
Vanity doors rub or have uneven gaps
Adjust leg levelers to level the vanity or adjust door hinges.
p. 7Show 3 more answers Show less
Maintenance and reset
- Re-seal the stone countertop periodically. p. 7
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Weight Limit | 50 lbs | Maximum weight capacity of the vanity. | p. 2 |
Where to find it in the PDF
- Assembly Instructions p. 6
- Care and Cleaning p. 7
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides assembly instructions for the Nova 37 Inch Single Vanity. Before beginning, ensure you have the necessary tools: safety goggles, sealant, and a level. The vanity is designed to hold a maximum of 50 lbs. Always ensure the floor is level before installation to prevent cabinet misalignment.
Assembly
Follow these steps to install your vanity:
- Position vanity: Place the vanity in the desired location, ensuring it is flush against the wall. Use a level to check for uneven floors and adjust the leg levelers as needed.
- Apply backsplash sealant: Clean the backsplash of debris. Apply thin beads of clear silicone sealant to the unpolished back and bottom edge of the backsplash.
- Install the backsplash: Set the unpolished bottom edge of the backsplash on the vanity countertop. Press gently against the wall and down on the top. Remove any excess sealant.
Care and Cleaning
Countertop Care
- Rinse with clean, hot water when needed.
- Blot spills immediately with mild soap and warm water.
- Avoid harsh cleaners; use non-abrasive household cleansers.
- Re-seal the stone periodically based on usage.
Cabinet Care
- Dust frequently with a soft, dry cloth.
- Clean spills immediately using a blotting action.
- Rub in the direction of the grain.
Troubleshooting
If the vanity doors rub against another surface or there is an uneven gap, the floor is likely not level. Adjust the leg levelers to ensure the vanity is level, or adjust the door hinges.
Manufacturer information
Home Decorators Collection
Practical help
Common problems
Vanity doors rub against another surface
Adjust the leg levelers to ensure the vanity is level, or adjust the door hinges.
Uneven gap between doors and cabinet
Adjust the leg levelers to ensure the vanity is level, or adjust the door hinges.
Before use
- Turn off water supply and drain out.
- Disconnect supply lines from the faucet.
- Remove old vanity top and vanity.
- Check floor for unevenness using a level.
- Gather tools: safety goggles, sealant, and level.
Show more Show less
Specs in practice
- Weight Limit
- The product is designed to hold a maximum of 50 lbs.
Images and diagrams
- The manual includes diagrams showing the vanity positioning, the application of sealant to the backsplash, and the final installation of the backsplash onto the vanity top.
Model compatibility
- Do not use harsh bathroom cleaners or grout cleaners on any natural stone.
- Ensure the vanity is installed on a flat, level surface.
Manual page author
David Miller
Documentation analyst