Lighting / Fixtures
User Manual for Immax PEACOCK LED Bedside Lamp 08981L/08985L
Quick guide for the Immax PEACOCK LED bedside lamp with clock, RGB light, and USB port. Includes setup instructions for time, alarms, backlight, and light modes.
Table of contents
Quick guide from the manual
The Immax PEACOCK is a multifunctional bedside lamp featuring a clock, RGB lighting, natural sound playback, and a USB charging port. This guide covers essential setup and operation steps. Please note that the device must be placed on a surface with a slope of no more than 6 degrees.
Power Connection
Connect the lamp to a power source using a power adapter with PD (Power Delivery 2.0/3.0) or QC (Qualcomm Quick Charge 2.0/3.0) protocol. The power cord is fixed and cannot be replaced.
Time and Alarm Settings
To set the time, press the SET button in normal mode. Use the UP and DOWN buttons to adjust values and press SET to confirm and move to the next setting (hour, minute, year, month, day). The device supports 12/24-hour formats; press the UP button in normal mode to toggle between them.
To set an alarm, press the MODE button to enter alarm mode. Use the SET button to cycle through hour, minute, snooze, and sound settings. Use the DOWN button to toggle alarms on/off or switch between Alarm 1 (weekdays) and Alarm 2 (weekends). Ensure the date is set correctly for the alarm schedule to function properly.
Lighting and Sound Features
- Night Light: Short touch the night light button to turn it on. Long touch to steplessly dim the light.
- RGB Light: Short touch to turn on or switch between three RGB modes. Long touch to turn off.
- Natural Sounds: The device plays 7 types of natural sounds with a timer (30/60/90 minutes).
- Snooze: Press the snooze button to pause the alarm. The alarm will sound again after the snooze interval.
Backlight Adjustment
The default backlight brightness is 100%. Press the backlight adjustment button to cycle through brightness levels (high-low-high).
Safety and Maintenance
Clean the surface with a soft cotton cloth; do not use corrosive solvents. The light source is irreplaceable. If the device malfunctions or the cable is damaged, stop using it immediately and contact the manufacturer. Do not disassemble the device.
Manufacturer information
Immax
Practical help
Common problems
Alarm does not trigger on the correct days
Ensure the current date is set correctly, as Alarm 1 is for weekdays and Alarm 2 is for weekends.
Device is unstable
The lamp cannot be used on surfaces with a slope greater than 6 degrees.
Alarm sound does not stop
Press the white noise button, RGB light button, or backlight adjustment button on the front panel to cancel the alarm sound.
Before use
- Ensure the power adapter supports PD or QC protocols.
- Check that the surface is level (slope < 6 degrees).
- Set the current date and time correctly for alarm functionality.
- Verify the power cable is undamaged.
Specs in practice
- Color Temperature
- 3000K + 300K, providing a warm white light.
Model compatibility
- Requires PD or QC protocol power adapter for optimal performance.
- External power cable is non-replaceable.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.