Lighting / LED Lamps
Philips MASTER Value LEDtube T8 1200mm 13.5W 6500K
Technical specifications and installation guide for the Philips MASTER Value LEDtube T8 1200mm. Includes electrical parameters, dimensions, and performance data for this 13.5W LED replacement for T8 fluorescent lamps.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Philips MASTER Value LEDtube T8 is a high-performance LED solution designed to replace traditional T8 fluorescent lamps. It is compatible with EM (electromagnetic) ballasts or can be installed directly on the mains. This tube is intended for general lighting in office, industry, retail, and hospitality applications. Note that this product is not dimmable.
Product Overview
This LED tube offers an energy-efficient alternative to standard 36W fluorescent tubes, consuming only 13.5W. It features a G13 base and provides a Cool Daylight color temperature (6500K). The design is optimized for fast installation and wide compatibility.
Technical Specifications
- Power Consumption: 13.5 W
- Wattage Equivalent: 36 W
- Voltage: 220-240 V
- Input Frequency: 50 to 60 Hz
- Color Temperature: 6500 K (Cool Daylight)
- Luminous Flux: 2,100 lm
- Beam Angle: 240 degrees
- CRI (Color Rendering Index): 83
- Dimmable: No
Dimensions
The tube has a total length of 1212.4 mm (A3 dimension). The bulb diameter is T8 standard (approx. 28 mm).
Performance and Lifetime
The LED tube is rated for a nominal lifetime of 60,000 hours with a switching cycle of 200,000. It operates effectively in ambient temperatures ranging from -20 to +45 °C. The T-Case maximum temperature is 55 °C.
Manufacturer information
Philips
Practical help
Common problems
Dimming issues
This LED tube is not compatible with dimmer switches. Do not attempt to use it with a dimming circuit.
Installation compatibility
The tube is designed for use with EM ballasts or direct mains connection. Ensure your fixture setup matches these requirements.
Before use
- Verify the existing fixture uses a G13 base.
- Ensure the supply voltage is within the 220-240V range.
- Confirm the application environment is within the -20 to +45 °C temperature range.
- Check if the existing ballast is an EM type if you are not wiring directly to the mains.
Specs in practice
- 36W Equivalent
- The brightness output is comparable to a standard 36W fluorescent tube.
Images and diagrams
- The dimensional drawing indicates the total length (A3) is 1212.4 mm.
- The tube diameter (D2) is 28 mm.
Model compatibility
- Not suitable for dimming applications.
- Suitable for general lighting, office, industry, retail, and hospitality.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.