Lighting / LED Lamps
Philips MASTER Value LEDtube T8 1200mm 14W Specification Sheet
Technical specification and installation overview for the Philips MASTER Value LEDtube T8 1200mm 14W. Includes dimensions, photometric data, electrical requirements, and compatibility information.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides the technical specifications and installation compatibility for the Philips MASTER Value LEDtube T8 (1200mm, 14W). This LED solution is designed for general lighting applications in offices, industry, retail, and hospitality. It is compatible with existing EM ballast systems or can be installed directly on the mains.
Product Overview
The MASTER Value LEDtube T8 is a high-performance LED replacement for traditional T8 fluorescent lamps. It features a frosted glass finish and a G13 medium bi-pin base.
Technical Specifications
- Power Consumption: 14 W
- Voltage: 220-240 V
- Line Frequency: 50 to 60 Hz
- Color Temperature: 6500 K (Cool Daylight)
- Luminous Flux: 2,100 lm
- Beam Angle: 240 degrees
- Color Rendering Index (CRI): 83
- Nominal Lifetime: 60,000 hours
- Dimmable: No
Installation and Compatibility
The tube is designed for wide compatibility. It can be used as a direct replacement for T8 fluorescent lamps using an EM ballast or installed directly on the mains. Ensure the ambient temperature of the installation environment is between -20 °C and 45 °C.
Dimensions
The product length is 1,200 mm. Detailed dimensional drawings are provided in the datasheet, specifying the tube diameter (D1, D2) and total length (A1, A2, A3) to ensure proper fitment in existing fixtures.
Safety and Environment
The product is EU RoHS compliant and carries the KEMA Keur certificate. The maximum T-Case temperature is 55 °C.
Manufacturer information
Philips
Practical help
Common problems
Light does not turn on
Verify that the fixture is receiving 220-240V power and that the G13 base is properly seated. Ensure the EM ballast is compatible or that the direct mains wiring is correct.
Cannot dim the light
This specific model is not dimmable. Do not connect to a dimmer switch.
Before use
- Verify the fixture voltage is 220-240V.
- Ensure the fixture uses a G13 base.
- Confirm the ambient temperature is within the -20°C to 45°C range.
- Check if the existing fixture uses an EM ballast or requires direct mains wiring.
- Ensure the fixture is not connected to a dimmer.
Images and diagrams
- The dimensional drawing illustrates the tube length (A1, A2, A3) and diameter (D1, D2) to assist with installation planning in existing luminaires.
Model compatibility
- Non-dimmable.
- Suitable for EM ballast or direct mains installation.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.