Electronics / Speakers & Soundbars
User Manual for Majorcom TU 100T VA Compression Horn Speaker
Quick guide for the Majorcom TU 100T VA compression horn speaker. Includes installation instructions, mounting torque specifications, and technical data for this EN 54-24 certified voice alarm speaker.
Table of contents
Quick Guide for Majorcom TU 100T VA
This document provides installation and technical information for the Majorcom TU 100T VA compression horn speaker. For safety, it is recommended that two people perform the installation.
Product Description
The TU 100T VA is a 100W compression horn speaker designed for high-noise environments, both indoors and outdoors (e.g., tunnels). It features an IP65-rated flame-retardant plastic housing, a ceramic connector, and a thermal fuse. It is EN 54-24 certified for voice alarm systems, ensuring intelligible voice notifications over long distances.
Installation Instructions
- Mount the two brackets (left and right) to the ceiling using appropriate fixing hardware (not included).
- Attach the speaker to the brackets using M8x20 screws and M8 washers. Tighten the bracket screws to a torque of 16 Nm.
- Pass the cable through the PG cable gland and connect it to the ceramic terminal block.
- Place the cover on the horn speaker and secure it with M8x25 screws, steel washers, and rubber M8 washers.
- Tighten the cover screws in two passes: first, tighten the 8 screws to 2.0 Nm, then re-tighten all screws to 2.0 Nm.
Technical Specifications
- Power: 100W / 50W / 25W
- Dimensions: 1228 x 832 x 413 mm
- Weight: 16 kg
- Sensitivity (1W/4W): 101 dB (EN 54-24)
- Frequency Response: 250 Hz to 10 kHz
- Protection: IP65
- Material: Flame-retardant plastic (UL 94 V-0)
Contact Information
Majorcom, 11 Avenue du Girou, 31620 VILLENEUVE-LÈS-BOULOC, FRANCE. Website: www.majorcom.fr, Email: [email protected], Phone: +33 [0]5 61 31 86 87.
Official resources from the manual
Manufacturer information
MAJORCOM
Practical help
Common problems
Difficulty mounting the speaker
The manufacturer recommends that 2 people perform the installation for safety.
Loose cover or bracket
Ensure bracket screws are tightened to 16 Nm and cover screws are tightened in two passes to 2.0 Nm.
Before use
- Verify mounting surface can support the 16 kg weight
- Ensure two people are available for installation
- Check that appropriate fixing hardware (not included) is ready
- Verify cable gland compatibility for the connection
- Ensure tools for M8 screws are available
Specs in practice
- 101 dB Sensitivity
- High sound pressure level output, compliant with EN 54-24 standards.
- 16 Nm Torque
- Required tightening force for the main bracket screws.
Images and diagrams
- The speaker features a horn design with a rear-mounted ceramic terminal block and cable gland for secure connection.
Model compatibility
- EN 54-24 certified for voice alarm systems in buildings.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.