User Manual for Audibax Detroit 1000X DSP PA System

Quick guide for the Audibax Detroit 1000X DSP PA system. Learn about system setup, control panel functions, DSP presets, and technical specifications.

Table of contents

Quick guide from the manual

This document provides essential setup and operation instructions for the Audibax Detroit 1000X DSP PA system. Before using the product, ensure you have read all safety instructions, particularly regarding electrical safety and ventilation. The system is designed for professional audio applications and features a column speaker with a 12-inch subwoofer.

System Setup and Controls

The control panel located on the unit allows for comprehensive sound management. Key controls and inputs include:

Volume Controls: Individual volume knobs for CH1, CH2, CH3, and CH4, plus a Master Volume control.
Tone Controls: Dedicated Treble and Bass volume controls for sound shaping.
Effect Control: Adjusts the effect level for the channels.
Mode Switch: Allows switching between Microphone, Guitar, and Line modes.
Inputs: Includes 3x Combo XLR/Jack inputs, 1x L/R Jack input, and 1x Aux input for connecting mixers or preamplifiers.
DSP Presets: Three modes available: Monitor, DJ, and Live.
Bluetooth & TWS: Dedicated buttons for Bluetooth pairing and TWS connection.
Phase Switch: Allows the user to reverse the phase by 180 degrees.
Line Out: Balanced XLR connector for connecting an additional subwoofer.

Technical Specifications

Frequency Response: 45 Hz - 20 kHz
Max SPL: 125 dB
Power Output: 400W (LF) + 200W (HF) RMS
Transducers: 8x 3" HF drivers and 1x 12" LF subwoofer
DSP: DSP-100, 96 kHz, 24-bit processor
Power Supply: 230V 50/60 Hz
Enclosure: ABS/PP Plastic

Safety Instructions

To ensure safe operation, please adhere to the following:

Do not block any ventilation openings.
Do not install near heat sources such as radiators or amplifiers.
Use only the power cable provided by the manufacturer.
Unplug the apparatus during lightning storms or when not in use for long periods.
Refer all servicing to qualified personnel if the unit is damaged, exposed to rain, or dropped.
Be aware that this product contains magnetic material which may affect implantable medical devices.

Practical help

Common problems

No sound output

Check that the power switch is ON, volume levels are turned up, and input cables are securely connected.

Distorted audio

Reduce the input gain or channel volume levels to prevent clipping.

Bluetooth connection failure

Ensure the device is within range and press the Bluetooth button to re-initiate pairing mode.

Before use

Ensure the power switch is in the OFF position before connecting cables.
Verify that the AC input cable is the original one supplied by the manufacturer.
Check that all volume controls are set to MIN before powering on the system.
Ensure the unit is placed on a stable surface or stand.
Verify that ventilation openings are not obstructed.

Specs in practice

Dispersion (H * V): 120° horizontal by 16° vertical coverage pattern for sound distribution.
Power Output: 400W for the subwoofer (LF) and 200W for the column array (HF).

Model compatibility

Inputs support balanced XLR and Jack connections for mixers or preamplifiers.
Line Out is a balanced XLR connector for daisy-chaining subwoofers.

Show more Show less

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.