Safety Instructions for Neomounts DS45-600BL2 Monitor Stand

Important Safety Information

This document provides essential safety warnings for the Neomounts DS45-600BL2 monitor stand. Please read these instructions carefully to prevent personal injury, equipment damage, or voiding the factory warranty. Store this manual in a secure place for future reference.

Installation Guidelines

• Installation should be performed by qualified and authorized service personnel.
• Two people are required for installation or removal to avoid injury or damage.
• Inspect the mounting surface before installation to ensure it is strong enough and undamaged.
• Use only the original mounting parts provided with the product.
• Do not install in areas subject to shock, vibration, high temperatures, humidity, or near air conditioning vents.
• Ensure the load applied is within the specified minimum and maximum limits.
• Use appropriate tools and equipment during installation to avoid injury.

Usage and Maintenance

• The product is designed for indoor use only.
• Keep hands and body parts clear of moving mechanisms during adjustment to avoid injury.
• Leave enough slack in the display cable to allow for the full range of motion.
• Do not rotate the monitor past the rear edge of the desk to avoid instability.
• If the monitor is too heavy or not properly adjusted, it may move down rapidly.
• Adjust weight and height settings after installation, and repeat this whenever equipment is added or removed.
• Perform periodic inspections of the product, its fixing, and the contact surface at least every six months.
• Do not use solvents or cleaning agents to clean the product.
• Remove equipment before detaching the product from the desk.
• Do not hang on the unit.