User Manual for Pattfield PE-AHS 20 Li Battery Hedge Trimmer

Quick guide from the manual

The Pattfield PE-AHS 20 Li is a 20V battery-powered hedge trimmer designed for private use. Before starting, ensure the work area is clear of obstacles and foreign objects like wire. Always hold the tool firmly with both hands and wear appropriate protective equipment, including eye and ear protection.

Product Overview

The hedge trimmer consists of the following main components:

• Handle bar
• Protection shield
• Cutting bar
• Impact guard
• Battery (not included)
• Battery release switch
• On/Off switch
• Rear handle
• Release switch
• Cutting device cover

Intended Use

This garden tool is intended for cutting and trimming hedges and bushes with a maximum branch thickness of 16 mm. It is designed for private use and is not suitable for work above shoulder height. Use only as described in this manual.

Operation

Inserting the Battery: Slide the charged battery into the battery slot until it clicks into place.

Switching On: Push and hold the release switch, then push and hold the On/Off switch to start the tool.

Switching Off: Release both the release switch and the On/Off switch to turn off the hedge trimmer.

Cutting Techniques: Hold the hedge trimmer at an angle of 5°–10° to the hedge. Cut the hedge from bottom to top, sides first. Cut the top in an oscillating movement, advancing slowly.

Maintenance

Cleaning: Clean the cutter bar after each use by removing contamination and remains of blades. Place the hedge trimmer on its side and apply a thin film of oil to the cutter bar. Use environmentally friendly lubricants.

Storage: Always place the cutting device cover on the cutter bar when the tool is not in use. Store the battery and the appliance separately in a dry, frost-free place (10-25 °C). Charge the battery before storing it for winter.

Technical Data

• Voltage: 20 V
• No-load speed: 2200/min
• Cutting length: 510 mm
• Max. branch thickness: 16 mm
• Weight: 2.28 kg

Troubleshooting

If the motor does not run, check if the battery is empty and charge it. If the battery does not charge, ensure it is inserted correctly into the charger and check the plug or fuse. If the hedge trimmer does not cut properly, the blades may be blunt or damaged; contact customer service for repair.

Safety

Always keep hands and body away from the cutter blade. Never remove cut material or hold material to be cut when blades are moving. Ensure the switch is off when clearing jammed material. Do not use the tool in wet or humid conditions.