Tools / Drills
User Manual for Ryobi 18V ONE+ Cordless Rotary Hammer Drill
Quick guide for the Ryobi 18V ONE+ Cordless Rotary Hammer Drill. Learn how to install the battery, attach bits, select operating modes, and maintain your tool safely.
Quick answers from the manual
Quick answer
- The Ryobi 18V ONE+ Rotary Hammer Drill is a cordless tool for drilling and light chiseling. It uses an SDS-Plus chuck and is compatible with the RYOBI 18V ONE+ battery system. p. 1
Key actions
- Install the battery by sliding it into the tool until it clicks. p. 1
- Insert an SDS-Plus bit into the chuck until it locks. p. 1
- Rotate the mode selector to choose Drill, Hammer Drill, or Chisel. p. 2
First start
- Ensure the battery is charged, insert it, select the mode, and press the trigger. p. 1, 2
Maintenance and reset
- Keep the tool clean, free of dust, and store in a dry place. Remove the battery before storage. p. 2, 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Chuck Type | SDS-Plus 1/2" | Quick-change chuck for drill bits and chisels. | p. 1 |
| Battery System | 18V ONE+ | Compatible with RYOBI 18V ONE+ batteries. | p. 1 |
Where to find it in the PDF
- Product Overview and Assembly p. 1
- Operation, Safety, and Maintenance p. 2
- Storage and Support p. 3
Table of contents
Quick guide from the manual
The Ryobi 18V ONE+ Rotary Hammer Drill is a cordless tool designed for drilling and light chiseling in concrete, masonry, wood, and metal. This tool is sold as a bare unit (battery and charger sold separately). Always ensure you use compatible 18V ONE+ batteries and appropriate SDS-Plus bits for the task.
Product Overview
This drill features an SDS-Plus 1/2 inch chuck for quick bit changes and is designed for portability and ergonomic use. It supports three main functions: drilling, hammer drilling, and light chiseling.
Assembly Instructions
Installing the Battery: Ensure the battery is compatible with the RYOBI 18V ONE+ system. Slide the battery into the tool until it clicks securely into place.
Attaching the Drill Bit or Chisel: Use only SDS-Plus bits or chisels compatible with the 1/2 inch chuck. Insert the bit into the chuck and ensure it locks firmly in place.
Selecting the Mode: Rotate the mode selector to choose between Drill, Hammer Drill, or Chisel modes depending on your application.
Operating Instructions
Powering On/Off: Press the trigger to start the drill and release it to stop.
Direction Control: Use the forward/reverse switch to toggle between drilling and removing screws.
Speed and Torque: Adjust the drilling speed or torque using the speed dial or by modulating the trigger control based on the material and task.
Usage Tips: Always select the correct bit type for the material. Apply steady pressure and let the tool do the work; avoid using excessive force.
Safety Instructions
- Always wear eye, ear, and hand protection.
- Keep hands and body away from rotating parts.
- Do not use the tool in wet or explosive environments.
- Keep bystanders at a safe distance.
- Remove the battery before making adjustments or changing bits.
- Do not attempt to open or modify the tool.
Maintenance and Storage
Keep the tool clean and free from dust and debris. Clean the tool with a dry or slightly damp cloth; do not use solvents. Inspect the tool and accessories regularly for damage. When storing, remove the battery and keep the tool in a cool, dry place out of the reach of children. Charge only with RYOBI-approved chargers.
Support
For questions, replacement parts, or service, visit www.ryobitools.com or contact customer support via email at [email protected].
Official resources from the manual
Manufacturer information
Ryobi
Practical help
Common problems
Tool does not start
Ensure the battery is fully charged and clicked securely into the tool.
Bit does not lock or fit
Verify that you are using SDS-Plus compatible bits and that they are properly inserted into the 1/2 inch chuck.
Before use
- Ensure the battery is a compatible 18V ONE+ unit.
- Select the appropriate SDS-Plus bit for the material (concrete, wood, metal).
- Wear required safety gear: eye, ear, and hand protection.
- Check that the work area is dry and free of explosive hazards.
- Ensure the battery is removed before changing bits or making adjustments.
Model compatibility
- Compatible with all RYOBI 18V ONE+ batteries.
- Requires SDS-Plus bits for hammer drilling and chiseling functions.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.