Plumbing / Showers & Tubs
User Manual for Sanela SLSN 01PB Stainless Steel Piezo-Controlled Shower Panel
Comprehensive user guide for the Sanela SLSN 01PB stainless steel piezo-controlled shower panel. Includes installation steps, battery replacement, parameter settings, and maintenance instructions.
Table of contents
Quick guide from the manual
The Sanela SLSN 01PB is a stainless steel shower panel designed for cold or premixed water, operated via a piezo button. Key operational requirements include a water pressure range of 0.1 - 0.6 MPa and a water inlet sieve dimension of ≤ 90 µm. The unit is powered by 4x AA batteries. Parameter adjustments, such as automatic stop time and hygienic flush settings, require the optional SLD 04 remote control.
Product Description
The SLSN 01PB is a wall-mounted shower panel featuring a piezo-controlled valve. It is designed for durability and hygiene, suitable for public and commercial facilities. The system includes an automatic stop function to conserve water.
Installation
Before installation, ensure you have read the safety instructions. The installation process involves:
- Preparing the wall according to the technical drawing (water inlet G 1/2").
- Mounting the panel using the provided screws and wall plugs.
- Connecting the water supply.
- Installing the 4x AA batteries into the battery holder.
- Connecting the battery cable to the solenoid valve.
- Flushing the system (approx. 10 liters) before final assembly.
Operation
The shower is activated by pressing the piezo button. The water flow will stop automatically after the preset time (factory setting is 120 seconds). The automatic stop time can be adjusted between 10 and 310 seconds using the SLD 04 remote control.
Parameter Settings
Advanced settings are managed via the SLD 04 remote control. These include:
- Automatic Stop: Adjustable from 10 to 310 seconds.
- Hygienic Flush Interval: Can be set to OFF, 6, 8, 12, 24, 48, 72, or 168 hours.
- Hygienic Flush Duration: Adjustable from 5 to 1200 seconds (factory setting 5 seconds).
Maintenance
Regular maintenance ensures optimal performance:
- Battery Replacement: When the battery capacity is low, the system will indicate this via sound and LED signals. Replace all 4 batteries with new AA alkaline batteries.
- Regulator Replacement: If flow issues occur, the regulator may need to be replaced. Ensure the water supply is shut off before performing this maintenance.
- Cleaning: Keep the piezo button and the shower head clean to ensure proper functionality.
Technical Data
- Power Supply: 6 V (4x AA alkaline batteries).
- Water Pressure: 0.1 - 0.6 MPa.
- Water Inlet: G 1/2".
- Sieve Dimension: ≤ 90 µm.
- Manufacturer Contact: SANELA spol. s r. o., Dukelských hrdinů 989, 563 01 Lanškroun, Czech Republic, [email protected].
Manufacturer information
SANELA spol. s r. o.
Practical help
Common problems
Low battery indication
The system provides sound and LED signals when battery capacity is low. Replace all 4 AA alkaline batteries immediately.
Water flow issues
Check the water inlet sieve for debris. Ensure the sieve dimension is ≤ 90 µm and clean if necessary.
Before use
- Verify water pressure is between 0.1 and 0.6 MPa.
- Ensure the water inlet sieve is clean and properly installed.
- Install 4 fresh AA alkaline batteries.
- Flush the water supply line with approximately 10 liters of water before final connection.
- Ensure the battery cable is securely connected to the solenoid valve.
Specs in practice
- Automatic Stop
- The duration the water flows after activation. Adjustable from 10 to 310 seconds.
- Hygienic Flush
- Periodic water flow to prevent stagnation. Interval adjustable from OFF to 168 hours; duration from 5 to 1200 seconds.
Model compatibility
- Requires SLD 04 remote control for adjusting automatic stop and hygienic flush parameters.
- Compatible with standard G 1/2" water supply connections.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.