Furniture / Home Furnishing
Sealey 10pc Garage Storage System (APMSHFP Series)
Comprehensive assembly and safety guide for the Sealey 10-piece modular garage storage system, featuring wall-mounted and free-standing cabinet configurations.
Table of contents
Product Overview
The Sealey 10pc Garage Storage System (APMSHFP Series) is a modular workshop furniture solution designed for versatility and durability. The system features a hinged flat-pack design for easy assembly, including base units with MDF worktops, adjustable feet, ball-bearing drawer runners, and magnetic door latches. The system includes pegboard backing panels for organized tool storage.
Safety Guidelines
- Always install the storage system on level, solid ground, preferably concrete.
- Do not exceed weight capacities or step on the shelves.
- Do not move the cabinets while they contain items.
- Avoid damp or wet locations to prevent corrosion.
- Ensure the work area is well-lit and clear of obstructions.
- Keep children and unauthorized persons away from the installation area.
Assembly and Installation
The system is supplied as a flat-pack. Assembly involves unfolding side panels, attaching top and bottom panels with M6x16mm screws, and installing shelf supports at desired heights. For wall-mounted configurations, the system must be secured to wall studs using the provided M6x65mm tapping screws and washers. Cabinets can be connected to each other using M6x16mm screws and M6 flange nuts for a unified structure.
Maintenance and Care
Keep the system clean and tidy. Do not use harsh solvents for cleaning, as these may damage the protective coating. Regularly check that all screws and bolts are tightened. If the product becomes unserviceable, dispose of it according to local environmental regulations.
Contact Information
For support, contact Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk, IP32 7AR. Phone: 01284 757500. Fax: 01284 703534. Email: [email protected]. Website: www.sealey.co.uk.
Official resources from the manual
Manufacturer information
Sealey Group
Practical help
Common problems
Cabinet door does not lock
Ensure the internal shelf is placed in the center position, as the locking mechanism is dependent on this alignment.
Drawer removal difficulty
Extend the drawer almost fully, push up the right-hand black release lever while pulling down the left-hand lever, then pull the drawer out.
Wall cabinet mounting instability
Ensure the wall cabinet is hung on the posts/rails with a 0.8cm gap before fully tightening the bolts to ensure proper alignment.
Before use
- Verify the floor is level and solid (concrete recommended).
- Ensure all M6x16mm screws are tightened during assembly.
- Check that all shelf supports are securely inserted at the same height.
- Confirm the wall is suitable for mounting if using the wall-fix option.
- Ensure the pegboard grommet holes are oriented correctly (top or bottom as specified per model).
Specs in practice
- Overall Size
- 3100 x 460 x 2080mm; total footprint required for the 10-piece configuration.
- Inner Drawer Dimensions
- 670 x 398 x 122mm; usable storage space per drawer.
- M6x65mm Tapping Screws
- Heavy-duty fasteners required specifically for securing the unit to wall studs.
Images and diagrams
- The manual provides step-by-step exploded views for each cabinet type (1-door, 2-door, and stacking).
- Specific diagrams illustrate the rail attachment process for pegboards.
- Detailed views show the correct orientation of shelf supports and drawer slide release levers.
Model compatibility
- The system is modular; extra units can be purchased to extend the storage setup.
- Designed for indoor workshop use only; not suitable for outdoor or high-condensation environments.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.