Sealey FH2010.V2 Fan Heater User Manual

Quick guide from the manual

The Sealey FH2010.V2 is a 2000W fan heater designed for well-insulated areas or occasional use. It features two heat settings (1000W/2000W), a fan-only mode, and an adjustable ambient room thermostat. The unit can be positioned horizontally or vertically.

Safety Precautions

• Distance: Keep textiles, curtains, and flammable materials at least 1m away from the air outlet.
• Environment: Do not use in bathrooms, showers, swimming pools, or areas with high condensation.
• Placement: Do not place the heater immediately below an electrical outlet or against surfaces like walls or furniture.
• Operation: Do not cover the heater or obstruct the air inlet/outlet. Do not use with timer devices or automatic switches.
• Children: Keep children under 3 years away unless supervised. Children aged 3-8 may only operate the unit if it is in its intended position and they are supervised.

Operation

1. Position the heater on a level surface, either horizontally or vertically, ensuring air intake and outlet are unobstructed.

2. Plug the heater into the mains supply.

3. Set the thermostat knob to the halfway position.

4. Use the selector switch to choose the desired power setting: 1000W, 2000W, or Fan Only (for cooling).

5. The heater will cycle on and off automatically to maintain the set temperature. Adjust the thermostat knob to reach your desired comfort level.

Maintenance

Warning: Always unplug the heater and allow it to cool completely before performing any maintenance.

• Cleaning: Use a soft, dry cloth. Do not use abrasives or solvents.
• Grille: Periodically check the air grille to ensure it is not blocked.
• Safety Device: The heater is equipped with an overheat protection device. If it triggers, disconnect from the mains for at least 3 minutes to allow it to cool, ensure vents are clear, and then restart.

If the power lead or plug is damaged, contact an authorised service agent. Do not attempt to repair the unit yourself.