Tools / Generators
Sealey WL453/8D Dimmable Dual Mounting Magnifying Work Light User Manual
Quick guide for the Sealey WL453/8D Dimmable Dual Mounting Magnifying Work Light. Learn how to install the clamp or base, operate the touch-sensitive dimmer, and ensure electrical safety.
Quick answers from the manual
Quick answer
- The Sealey WL453/8D is a dimmable magnifying work light with 45 SMD LEDs. It can be mounted using a table clamp (max 44mm) or the included base. It features a touch-sensitive dimmer for brightness control. p. 1, 2
Key actions
- Attach the clamp p. 1
- Attach the base p. 1, 2
- Adjust brightness p. 2
First start
- Check parts and inspect cable p. 1
Show 3 more answers Show less
Maintenance and reset
- Disposal p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| LEDs | 45 SMD | Light source | p. 1 |
| Nett Weight | 1.08kg | Product weight | p. 1 |
| Supply | 230V | p. 1 | |
| Clamp Capacity | ≤44mm | Max table thickness | p. 1 |
Where to find it in the PDF
- Safety and Specifications p. 1
- Operation and Disposal p. 2
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Sealey WL453/8D is a magnifying work light featuring 45 SMD LEDs and a touch-sensitive dimmer. It is designed for indoor use and offers two mounting options: a table clamp or a sturdy base. Ensure the light is unplugged before assembly or changing the mounting method.
Safety Instructions
- Electrical Safety: Use only the supplied plug. Ensure the voltage matches the lamp (230V).
- Installation: An RCCB (Residual Current Circuit Breaker) is recommended in the main distribution board.
- Usage: For indoor use only. Do not use in wet or damp conditions.
- Maintenance: Inspect the plug, cable, and connector for wear or damage before use. Do not use if damaged.
Installation
Attaching the Clamp
- Ensure the light is unplugged.
- Fix the table clamp to a suitable table (maximum thickness ≤44mm).
- Remove the adaptor from the bottom of the lamp arm.
- Insert the lamp arm into the table clamp.
- Connect the adapter and turn on the electricity.
Attaching the Base
- Ensure the light is unplugged.
- Remove the adaptor from the bottom of the lamp arm.
- Insert the lamp arm into the corresponding hole in the base.
- Connect the adapter and turn on the electricity.
Operation
Dimmer Switch
- On/Off: Quickly touch the power symbol on the lamp arm to turn the light on or off.
- Dimming: Touch and hold the power symbol to dim the light. Touch and hold again to increase brightness. The brightness stops changing when you release the symbol.
Maintenance and Disposal
The product should be disposed of in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). Recycle unwanted materials and packaging at a local recycling centre.
Manufacturer information
Sealey Group
Practical help
Common problems
Light does not turn on
Ensure the adapter is securely connected to the power supply and the lamp arm.
Clamp does not fit the table
Verify that the table thickness is ≤44mm. The clamp is not compatible with thicker surfaces.
Before use
- Check the box for all parts (fig.1).
- Inspect the charger plug, cable, and connector for wear or damage.
- Verify that the mains voltage matches the lamp (230V).
- Ensure the work area is dry (indoor use only).
Show more Show less
Specs in practice
- 3 dioptre 85mm lens
- Main magnification lens for detailed work.
- 8 dioptre 22mm lens
- High magnification spot lens.
- Clamp capacity
- Maximum table thickness of 44mm.
Images and diagrams
- Fig 1: Illustrates the components including the lamp arm, table clamp, base, and power adapter.
- Fig 2: Shows the assembled lamp mounted on the base.
Model compatibility
- Indoor use only.
- Table clamp requires a surface thickness of ≤44mm.
Manual page author
Michael Turner
Technical manual editor