Spider Farmer Leaf Bowl Trimmer

Quick guide from the manual

This manual provides essential instructions for the Spider Farmer Leaf Bowl Trimmer. The device is designed for manual trimming using a hand crank system. Key procedures include the correct assembly of the bowl components and safe blade replacement. Always prioritize safety by wearing gloves when handling the sharp blades.

Product Overview and Accessories

The package includes the following components:

• Hand crank: Used to rotate the trimming mechanism.
• Arc cover: The top housing containing the silicone strips.
• Silicone strips: 8 rows of 3 strips attached to the arc cover.
• Mesh filter disc: Sits between the basin and the arc cover.
• Stainless steel basin: The base container (4 feet).
• Blades: Includes 2 Cross blades, 2 Flat blades, and 1 Serrated blade.
• Accessories: Includes gloves and small scissors.

Assembly Instructions

Please complete the assembly in the following structural order:

1. Place the stainless steel basin on a flat surface.
2. Insert the mesh filter disc into the basin.
3. Place the arc cover (with silicone strips) on top of the mesh filter disc.
4. Align the hand crank with the hole on top of the arc cover and insert it. The handle does not require screwing; it simply needs to be aligned and inserted into the hole.

Blade Replacement

To change the blades, follow these steps:

1. Safety First: Always wear gloves when changing blades to prevent cuts.
2. Remove the screw holding the current blade in place.
3. Remove the original blade.
4. Install the new blade and tighten the screw securely.

Safety Warning

The blades are extremely sharp. Always wear protective gloves when installing or replacing blades to prevent accidental cuts.

Contact Information

For support, you can reach out via the following channels:

Phone: +1 866 553 8582Email: [email protected] or [email protected]