Sunsky 15W Disk Check Wireless Charger

Quick guide from the manual

To use your wireless charger, connect it to a qualified AC adapter. Once connected, a LED light will illuminate. Place your Qi-standard smartphone on the charging plate to begin charging. The LED light will blink during the charging process. If the phone does not start charging, try repositioning it on the plate.

Product description

The Disk Check wireless charger is designed for smartphones compatible with the Qi-standard. It provides a cable-free charging experience by simply placing the device on the charging surface.

Specifications

• Input: Refer to the printing on the back cover of the charging plate.
• Output: 5V, 1A max.
• Compatibility: Qi-standard smartphones.

Operation

Connect the wireless charger to an outlet using a qualified AC adapter. When the LED light is lit, the device is ready. Place your phone on the charging plate. The LED light will blink to indicate that the battery is charging. If charging does not initiate, adjust the position of the phone on the plate.

Safety and FCC compliance

This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. It is designed to provide reasonable protection against harmful interference in a residential installation. To ensure safety and proper operation:

• Maintain a minimum distance of 15cm between the radiator and your body.
• Do not co-locate or operate this transmitter in conjunction with any other antenna or transmitter.
• If interference occurs, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and the receiver, or connecting the equipment to a different circuit outlet.