Tecnolite 100SOLLED131VCD65N Outdoor Solar LED Light Instruction Manual

Product Overview

The Tecnolite 100SOLLED131VCD65N is a high-efficiency outdoor solar LED light designed for reliable illumination. This fixture is powered by a rechargeable lithium battery, making it an eco-friendly and energy-saving solution for outdoor spaces. The unit features an integrated PIR motion sensor and a remote control for convenient operation and mode selection.

Safety Precautions

Before installation, ensure the power is disconnected. The luminaire must be installed at a minimum distance of 0.50 meters from any combustible material to prevent fire hazards. Always use clean rags or gloves when handling the light to avoid burns or damage to the surface. This product is not intended for use by individuals, including children, with reduced physical, sensory, or mental capabilities unless supervised by a responsible person.

Installation and Setup

The installation process involves mounting the solar panel and the light fixture securely. Ensure the solar panel is positioned to receive maximum sunlight. Before the first use, it is critical to charge the battery completely for at least 12 hours. The recommended installation height is 5.0 meters with a detection angle of 120 degrees. Use the provided anchors and screws to mount the components firmly to the wall or pole.

Operation and Remote Control

The light operates via a remote control with a range of up to 5 meters. The PIR sensor detects movement to trigger the light. Various modes allow for different brightness levels and durations, such as 3, 5, or 8 hours of illumination. The system automatically turns on at night and off during the day. When motion is detected, the light increases to 100% brightness, and it dims to 50% or 15% when no motion is present, depending on the selected mode.

Maintenance and Care

To ensure optimal performance, keep the solar panel clean and free of debris. Regularly inspect the connections to ensure they are secure. If the light requires cleaning, use a dry cloth. Do not attempt to modify the internal components, as this may void the warranty and pose safety risks. If the unit fails to operate, check the battery charge status and ensure the sensor is not obstructed.