Lighting / LED Lamps
Installation Guide for Tecnolite 15LVCLED895MV30B LED Lamp
A comprehensive installation and safety guide for the Tecnolite 15LVCLED895MV30B LED lamp. Includes step-by-step mounting instructions, wiring diagrams, and maintenance tips.
Table of contents
Quick Guide
This document provides essential installation and safety instructions for the Tecnolite 15LVCLED895MV30B LED lamp. This fixture is designed for indoor use only. Ensure a minimum distance of 0.50 meters from any combustible material to prevent fire hazards. Always disconnect the power source before performing any installation or maintenance work.
Safety Precautions
- Indoor Use Only: This product is designed exclusively for indoor environments.
- Fire Safety: Maintain a minimum distance of 0.50 meters from combustible materials.
- Electrical Safety: Always disconnect the power source before starting installation.
- Handling: The lamp and other parts may become hot during operation. Use a clean rag and gloves when handling the fixture.
- Grounding: The ground connection must be physical.
Installation
Follow these steps to install your LED lamp:
- Mounting the Bracket: Drill holes in the mounting surface, insert the provided anchors (A-02), and secure the mounting bracket using the screws (A-01). Ensure you use appropriate tools and protective gear.
- Electrical Connection: Connect the electrical wires according to the diagram. Ensure the Line, Ground, and Neutral wires are correctly connected to the fixture's terminal block. The ground connection must be physical.
- Final Assembly: Attach the lamp fixture to the installed mounting bracket and secure it firmly using the provided screws.
Maintenance
To keep your lamp in good condition:
- Disconnect the power source before cleaning.
- Clean the luminaire and its internal parts with a dry rag.
- Periodically check all electrical connections to ensure they remain secure.
Technical Specifications
- Model: 15LVCLED895MV30B / 15LVCLED895MV30N
- Power Supply: 100V - 277V ~ 50/60 Hz
- Current: 0.15 A - 0.06 A
- Lamp Type: LED
- Power: 15 W
Manufacturer information
Tecnolite
Practical help
Common problems
Lamp does not turn on
Verify that the power source is active and that all electrical connections (Line, Neutral, Ground) are properly secured.
Risk of fire
Ensure the lamp is installed at a minimum distance of 0.50 meters from any combustible materials.
Before use
- Ensure the power supply is disconnected before starting installation.
- Verify that the mounting surface is suitable for the fixture.
- Check that you have the necessary tools (drill, screwdriver, protective gloves).
- Confirm the voltage of your power supply matches the 100V-277V range.
- Ensure the ground connection is physical.
Images and diagrams
- Step 1: Drilling and mounting bracket installation.
- Step 2: Wiring diagram showing Line, Ground, and Neutral connections.
- Step 3: Attaching the lamp body to the bracket.
Model compatibility
- Designed for indoor use only.
- Not suitable for work with voltages outside the specified range.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.