Health / Personal Care
User Manual for Timex 02M-395000-01 Digital Watch
Quick guide for the Timex 02M-395000-01 digital watch, covering time and date settings, alarm configuration, stopwatch usage, second time zone, and water resistance precautions.
Table of contents
Quick guide from the manual
This document provides essential operating instructions for your Timex digital watch. Please note that your specific model may not include all features described. The watch features a daily alarm, 24-hour stopwatch, second time zone, and INDIGLO night-light.
Time and Date Settings
To set the time and date:
- With the time and date displayed, press and hold SET for 2 seconds.
- The seconds will flash; press START/STOP to reset to zero.
- Press MODE to cycle through hours, minutes, year, month, and date.
- Use START/STOP to adjust the values. Press and hold START/STOP for rapid advancement.
- Press SET at any step to save and exit.
- Press SET in time mode to toggle between 12-hour and 24-hour formats.
Alarm and Chime
To set the daily alarm:
- Press MODE repeatedly until AL appears.
- Press SET, then use START/STOP to adjust the hour.
- Press MODE, then use START/STOP to adjust the minutes.
- Press SET to finish.
- Press START/STOP repeatedly to toggle alarm and hourly chime combinations. The alarm icon (s) indicates the alarm is on; the chime icon (b) indicates the hourly chime is active.
Stopwatch
- Press MODE repeatedly until SP appears.
- Press START/STOP to start or stop the stopwatch.
- Press SET to reset the stopwatch to zero.
- While running, press SET to take a lap/split time. The display freezes while the stopwatch continues to run. Press SET again to return to the running display.
Second Time Zone
- Press MODE repeatedly until T2 appears.
- Press SET, then use START/STOP to adjust the hour.
- Press MODE, then use START/STOP to adjust the minutes in 30-minute increments.
- Press SET to finish.
INDIGLO Night-Light
Press the INDIGLO button to illuminate the watch display for 2-3 seconds.
Water and Shock Resistance
WARNING: To maintain water resistance, do not press any buttons while underwater.
- The watch is water-resistant only as long as the lens, push buttons, and case remain intact.
- Rinse the watch with fresh water after exposure to salt water.
- The watch is not a diver watch and should not be used for diving.
Battery
The watch button cell or coin battery is not intended to be replaced by the consumer. Only a jeweler or other professional should replace the battery.
Manufacturer information
Timex Group USA, Inc.
Practical help
Common problems
Alarm or chime not working
Press START/STOP repeatedly in the alarm mode to cycle through the four combinations of alarm and chime settings to ensure they are enabled.
Water resistance compromised
Do not press any buttons while the watch is underwater. Ensure the lens, buttons, and case are intact.
Battery replacement
Do not attempt to replace the battery yourself. Take the watch to a jeweler or professional.
Before use
- Check if your model supports all features described in the manual.
- Ensure the watch is not used for diving.
- Rinse with fresh water after salt water exposure.
- Do not press buttons underwater.
Specs in practice
- Water Resistance
- Indicated by meter marking or (O) on the watch face/caseback. Do not press buttons underwater.
- Battery Type
- Lithium metal, CR2032, 3.0V. Not user-replaceable.
- Stopwatch Precision
- Counts by hundredths of a second up to 30 minutes, then by seconds up to 24 hours.
Model compatibility
- The watch is designed to pass ISO tests for shock resistance.
- Not a diver watch; do not use for diving.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.