Power / Batteries Chargers
Timex Higher-Function Analog Watch User Manual
Quick guide for Timex Higher-Function Analog watches, covering setup, chronograph operation, Indiglo night-light, and bracelet adjustments.
Table of contents
Quick guide from the manual
This document provides operating instructions for various Timex Higher-Function Analog watch models. It covers initial setup, water resistance guidelines, Indiglo night-light usage, and specific instructions for different chronograph types.
Getting Started
To start your watch, remove the plastic guard from under the crown and press the crown in against the case. The second hand will begin advancing in one-second intervals. For deep-depth water-resistant models, ensure the crown is screwed in to maintain water resistance.
Water and Shock Resistance
If your watch is water-resistant, the depth rating (WR_M) is indicated on the watch. Do not press buttons or pull out the crown while underwater unless the watch is rated for 200 meters.
Indiglo Night-Light
Press the button or crown to activate the Indiglo night-light. The Night-Mode feature can be activated by pressing and holding the Indiglo button for 4 seconds, keeping the light active for 8 hours.
Chronograph Operation
The manual covers several chronograph types. Generally, use the pushers to start, stop, and reset the chronograph. If the hands do not return to the zero position after a reset or battery change, use the recalibration procedure: pull the crown to the appropriate position and use the pushers to adjust the hands to the zero position.
Bracelet Adjustments
The manual provides instructions for adjusting sliding clasp bracelets, foldover clasp bracelets, and removing bracelet links. Always use a pointed tool for link removal and ensure pins are reinserted securely.
Manufacturer information
Timex Group USA, Inc.
Practical help
Common problems
Chronograph hands do not return to zero position
Pull the crown to the adjustment position and use the pushers to move the hands to the zero position.
Watch is not water-resistant
Ensure the crystal, crown, and case are intact. For deep-depth models, ensure the crown is fully screwed in.
Before use
- Remove the plastic guard from under the crown.
- Press the crown in against the case.
- Verify water resistance rating before underwater use.
- Adjust chronograph hands to zero position before first use.
Model compatibility
- Not all features described are available on every model.
- Battery replacement should only be performed by a professional jeweler.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.