Home Appliances / Commercial Kitchen Equipment
Traulsen C SERIES 1-Section Compact Solid Door Prep Table
Quick guide for the Traulsen C SERIES 1-Section Compact Solid Door Prep Table. Includes technical specifications, refrigeration system details, cabinet construction features, and warranty information.
Table of contents
Quick guide from the manual
This document provides technical specifications and construction details for the Traulsen C SERIES 1-Section Compact Solid Door Prep Table. It is designed for commercial kitchen environments, featuring a self-contained, side-mounted refrigeration system and a durable stainless steel exterior.
Technical Specifications
- Electrical: 115/60/1, 2.4 Amps, 1/5 HP, NEMA 5-15P plug.
- Dimensions: 27-7/8" (70.8 cm) Length, 32-3/4" (83.2 cm) Depth, 44" (111.8 cm) Overall Height (includes 4" casters).
- Refrigeration: R-290 refrigerant, 1800 BTU, 2.5 oz (70.9 g) charge.
- Capacity: 8 x 1/6 size pans (top).
Refrigeration System
The unit utilizes a self-contained, side-mounted system designed for high performance and consistent food-safe temperatures between 32-41°F (0-5°C). Key features include:
- Environmentally friendly R-290 refrigerant.
- Front-breathing design allowing for zero-clearance installation.
- Water-resistant LED display for microprocessor control.
- Chambered, forced-air rail operation.
- Tested to NSF7 standards.
Cabinet Construction
The cabinet is built for durability and ease of maintenance:
- Exterior/Interior: Stainless steel construction.
- Insulation: Average 2-3/8" (6.03 cm) thick high-density, non-CFC foamed-in-place polyurethane.
- Work Surface: 12" (30.5 cm) deep, full-length, removable NSF-approved white polyethylene cutting board.
- Pans: Includes (8) 4" deep 1/6 size polycarbonate pans; rail accommodates up to 6" deep pans.
- Mobility: Set of (4) 4" high casters (2 with brakes, 2 without), factory-installed.
Door and Interior
- Door: Self-closing with a stay-open feature, recessed handle, and magnetic, snap-in gasket. The door is field-reversible.
- Shelving: (2) adjustable, epoxy-coated wire shelves per section supported on pilasters. Maximum load per shelf is 150 pounds (68.03 kg).
Warranty
The unit comes with a standard six-year parts and labor warranty, plus an additional one-year compressor parts warranty (total of seven years for the compressor).
Practical help
Common problems
Temperature inconsistency
Ensure the unit is operating within the specified 32-41°F range and that the front-breathing vents are not obstructed.
Shelf overloading
Do not exceed 150 pounds (68.03 kg) per shelf to prevent damage to pilasters.
Before use
- Verify electrical supply matches 115/60/1 requirements.
- Ensure the installation location allows for front-breathing clearance.
- Confirm the unit is level and casters are properly installed.
- Check that the door gasket is clean and sealing correctly.
- Verify the ambient temperature is suitable for the unit's performance ratings.
Images and diagrams
- Plan view provides precise dimensions for elevation and side profile clearance.
- Pan layout diagram shows the configuration of the 8 included 1/6 size pans.
Model compatibility
- Rail accommodates pans up to 6 inches deep.
- Door is field-reversible (available as Right or Left hinge models).
- Optional field-installed accessories include 6-inch legs, 6-inch casters, and an overshelf.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.