Garden / Pool Equipment
User Manual for Vevor Pool Liner Pad
Quick guide for the Vevor Pool Liner Pad. Includes installation steps, safety precautions, and technical specifications for models 18R, 15R, 12R, 24R, 21R, 27R, 1530OV, 1833OV, 1224OV, 1632RE, and 1224RE.
Quick answers from the manual
Quick answer
- The Vevor Pool Liner Pad is designed to be installed under a pool liner on a prepared sand base. It requires unfolding 24 hours before installation to remove creases. p. 3
Key actions
- Unfold the pad 24 hours before installation. p. 3
- Level the sand on the pool floor before placing the pad. p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| 18R | 18ft | p. 4 | |
| 15R | 15ft | p. 4 | |
| 12R | 12ft | p. 4 |
Where to find it in the PDF
- Safety Instructions p. 2
- Installation Instructions p. 3
- Product Parameters p. 4
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Vevor Pool Liner Pad is designed to provide a protective layer under your pool liner. For optimal results, unfold the pad 24 hours before installation to allow creases to smooth out. Always ensure the installation surface is flat, level, and free of debris.
Safety Instructions
Read all instructions before use to prevent serious injury.
- Assembly: Wear ANSI-approved safety goggles and heavy-duty work gloves. Assemble only on a flat, level, hard, and smooth surface. Keep the area clean and well-lit.
- Usage: Do not sit or stand on the item. This is not a toy; keep children away. Do not exceed weight capacities. Inspect before every use and do not use if damaged.
Installation Instructions
Follow these steps to install the liner pad:
- After assembling the pool wall, smooth and level the sand on the pool floor. Create sand coves at this time.
- If using foam coves, install them after the pad has been placed.
- Spread the precut pool liner over the sand, ensuring it is even around the pool perimeter.
- Install the liner over the liner pad and foam cove.
Technical Specifications
The liner pads are available in various sizes and weights. All models feature a density of 180g/m2 and are black in color.
Manufacturer information
VEVOR
Practical help
Common problems
Creases in the pad
Unfold the pad 24 hours prior to installation to allow crease lines to smooth out.
Before use
- Ensure the assembly area is clean and well-lit.
- Wear ANSI-approved safety goggles and heavy-duty work gloves.
- Verify the surface is flat, level, hard, and smooth.
- Inspect the pad for any damage before use.
Images and diagrams
- The installation diagram illustrates the correct layering: Sand Base at the bottom, followed by the LinerLife Pad, the Cove, the Liner, and the Pool Wall.
Model compatibility
- The product is designed for use on flat, level, hard, and smooth surfaces.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.