Garden / Pool Equipment
User Manual for VEVOR 20T Porta Power Jack
Quick guide for the VEVOR 20T Porta Power Jack. Includes safety instructions, maintenance procedures, troubleshooting, and parts diagrams.
Quick answers from the manual
Quick answer
- The VEVOR 20T Porta Power Jack is a hydraulic repair kit used for lifting, pushing, pulling, bending, straightening, and spreading in automotive and heavy equipment repair. p. 1, 15
Key actions
- Change hydraulic oil p. 10, 20
- Purge air from the pump p. 10, 20
Problems and fixes
Pump feels spongy
Purge air by opening the release valve, pumping the handle, and checking oil levels.
p. 10, 20Show 3 more answers Show less
Maintenance and reset
- Change hydraulic oil every 30-50 uses. p. 10, 20
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Max lifting pressure | 20 tons | Maximum load capacity | p. 15 |
| Ram stroke | 145 mm | Maximum extension distance | p. 15 |
Where to find it in the PDF
- Safety Instructions p. 4
- Parts Diagram p. 5, 18, 19
- Maintenance p. 10, 20
Table of contents
Quick guide from the manual
The VEVOR 20T Porta Power Jack is a hydraulic repair kit designed for automotive, truck, and heavy equipment repair. It is suitable for lifting, pushing, pulling, bending, straightening, and spreading. Ensure the equipment is used on hard, level ground and that all connections are secure before operation.
Safety Instructions
- Stay alert: Do not use the tool when tired or under the influence of drugs, alcohol, or medication.
- Proper attire: Keep hair, clothing, and gloves away from moving parts.
- Safety gear: Wear ANSI-approved safety glasses and heavy-duty work gloves.
- Avoid off-center loads: If the pump is hard to operate, stop immediately and adjust the ram.
- Protect the hose: Do not drop heavy objects on the hose and avoid sharp kinks.
- Authorized parts: Use only identical replacement parts and accessories identified by the manufacturer.
Maintenance
Regular maintenance is essential for safe operation:
- Cleaning: Keep the tool and accessories free of hydraulic fluid and grease. Use a mild detergent and a damp cloth. Do not use flammable solvents.
- Inspection: Before each use, check for loose components, misalignment, binding of moving parts, or broken parts.
- Oil Change: Change the hydraulic oil after 30-50 uses. Empty the used oil, inject fresh oil using an oil gun, and purge the system.
- Purging Air: If the pump feels spongy or the ram lowers while the release valve is closed, air may be in the system. Purge by opening the release valve, pumping the handle, and checking the oil level.
Troubleshooting
If the pump fails to operate correctly, check for air in the system or incorrect valve settings. Always stop work immediately if a problem occurs to prevent personal injury.
Manufacturer information
VEVOR
Practical help
Common problems
Pump feels spongy or ram lowers while valve is closed
Purge air from the system by opening the release valve, pumping the handle, and checking the oil level.
Ram is tilted or piston rod is curved
Stop work immediately, ensure correct connection of the ram and base, and place on hard ground.
Before use
- Check for loose components or misalignment.
- Inspect the hose for kinks or damage.
- Ensure the ram and base are correctly connected.
- Verify the hydraulic oil level.
- Wear appropriate safety gear (glasses, gloves).
Show more Show less
Specs in practice
- Max lifting pressure
- 20 tons
- Hydraulic oil capacity
- 575g ± 5g
Model compatibility
- Use only accessories identified by the manufacturer for this specific tool model.
Manual page author
Michael Turner
Technical manual editor