Vivitar 120G True Wireless Earbuds User Manual

Get the most out of your Vivitar 120G True Wireless Earbuds with this quick guide. Learn how to pair, control playback, charge, and troubleshoot your device.

Table of contents

Quick guide from the manual

This document provides essential instructions for operating the Vivitar 120G True Wireless Earbuds. It covers the initial setup, charging procedures, Bluetooth pairing, and touch control functions to manage audio playback and calls.

Charging the earbuds

To charge your earbuds, follow these steps:

Insert the USB-C end of the included charging cable into the charging port on the bottom of the charging case.
Plug the other end of the cable into a computer or a suitable USB charging adapter.
LED Indicators: The LED will turn red while charging and will turn off when the case is fully charged.

Bluetooth pairing

Follow these steps to connect your earbuds to your device:

Press the button on the charging case to activate pairing mode.
Wait for the pairing LED to flash.
Open the Bluetooth settings on your smartphone or device.
Select TWS Earbuds from the list of available devices to complete the connection.

Earbud controls

Use the multi-function buttons on the earbuds to control your media and calls:

Volume Down: Tap the left earbud twice.
Volume Up: Tap the right earbud twice.
Next Song: Tap the left earbud three times.
Previous Song: Tap the right earbud three times.
Voice Assistant (Siri/Google Assistant): Press and hold either earbud's multi-function button for 1.5 seconds.
End Call: Press the multi-function button.

Technical specifications

Bluetooth Version: 5.0 (supports both sides)
Bluetooth Range: 10 meters
Earbud Battery: 30mAh rechargeable Li-ion battery
Charging Case Battery: 200mAh
Play Time: Approximately 2 hours
Talk Time: Approximately 2 hours
Standby Time: Approximately 180 hours

Safety precautions

Read all instructions before using the earbuds and charging case.
Do not use the earbuds near water or on wet surfaces.
Clean only using a clean cloth.
Keep away from children; the product contains small parts that can be a choking hazard.
Do not expose the product to excessive heat, fire, or direct sunlight.
Do not attempt to repair the product yourself; contact a qualified service center if service is needed.

Practical help

Common problems

Earbuds not pairing

Ensure the charging case button is pressed to initiate pairing mode and look for 'TWS Earbuds' in your device's Bluetooth settings.

Charging issues

Ensure the USB-C cable is securely connected to the charging case and the power source. Check that the LED indicator turns red.

Before use

Charge the case fully before first use.
Ensure Bluetooth is enabled on your smartphone.
Keep earbuds within 10 meters of the connected device.
Verify the charging cable is properly connected.

Specs in practice

Bluetooth Version 5.0: Supports a stable wireless connection up to 10 meters.
Play/Talk Time: Approximately 2 hours of usage on a single charge.
Battery Capacity: 30mAh per earbud; 200mAh for the charging case.

Model compatibility

Compatible with devices supporting Bluetooth 5.0.
Supports Siri and Google Assistant voice commands.

Show more Show less

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.