findmanualpdf.com

User Guide for Wampler Golden Jubilee Overdrive and Distortion Pedal

Quick reference guide for the Wampler Golden Jubilee pedal. Learn how to configure the Distortion and Overdrive channels, adjust character and order settings, and find recommended tone presets.

Table of contents

Quick guide from the manual

The Wampler Golden Jubilee is a dual-channel pedal featuring Distortion (DS) and Overdrive (OD) circuits. To begin, connect your instrument to the Input jack and your amplifier to the Output jack. The pedal requires a 9-18V DC power source. Use the toggle switches to configure the character of each channel and the signal order between them.

Controls and operation

The pedal features a shared set of controls for both channels:

  • Level: Controls the total output volume. Turning clockwise increases the volume.
  • Tone: Adjusts the high-end frequencies. Turning clockwise increases the high-end presence.
  • Gain: Adjusts the amount of gain. Turning clockwise increases the gain level.

Advanced settings

The pedal includes specific switches to shape your tone:

  • DS Character: Adjusts between Bright (Left) and Dark (Right) for the Distortion channel.
  • OD Character: Adjusts between Normal (Left) and Hard Clipping (Right) for the Overdrive channel.
  • Order: Determines the signal path between channels. The Left position routes OD into DS, while the Right position routes DS into OD.

Power requirements

To ensure proper operation and avoid damage to the pedal, adhere to the following power guidelines:

  • Use only a 9-18V DC power source intended for guitar pedals.
  • Do not use AC power.
  • Do not use center-pin positive adapters.
  • The pedal draws approximately 30mA at 9V and 30mA at 18V.

Suggested settings

Use these settings as a starting point to find your perfect tone:

  • Blues Crunch: Mild breakup, great for the blues.
  • Classic Crunch: Harder distortion, great for classic rock.
  • Lead Boost: Low to medium gain transparent, like an extra amp gain channel.
  • Meaty Distortion: Heavier, thicker distortion with plenty of grunt.
  • Solo Crunch: High gain solo tones, crunchy, mid-focused.
  • Fluid Solo: Creamy liquid articulation, great solo tone with a beefy low end.

Warranty and support

Wampler offers a 5-year warranty to the original purchaser against defects in material and workmanship. For support, warranty claims, or product questions, contact Wampler via email at [email protected] or call (765) 352-8626. Register your pedal at wamplerpedals.com/warranty-registration to ensure quicker service.

Practical help

Common problems

Pedal does not power on

Ensure you are using a 9-18V DC power supply and that it is not a center-pin positive adapter.

No sound output

Check that the instrument is connected to the Input and the amplifier is connected to the Output. Verify the power supply is connected.

Unexpected tone or signal behavior

Check the position of the Order switch to ensure the signal path (OD into DS or DS into OD) is set as desired.

Before use

  • Verify the power supply is 9-18V DC.
  • Ensure the power supply is center-negative.
  • Connect the instrument to the Input jack.
  • Connect the amplifier to the Output jack.
  • Register the pedal online within 10 days of purchase.

Model compatibility

  • Do not use AC power.
  • Do not use center-pin positive adapters.
  • Use only power sources intended for guitar pedals.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.