Wampler Cryptid Fuzz Pedal User Guide
Quick reference guide for the Wampler Cryptid Fuzz pedal. Learn about control functions, power requirements, recommended settings, and maintenance.
Table of contents
Quick guide from the manual
The Wampler Cryptid is a fuzz pedal designed to offer a wide range of fuzz textures. This guide provides essential information on how to operate the controls, power the unit correctly, and achieve specific tones using suggested settings.
Controls
The pedal features several knobs and switches to shape your sound:
- Volume: Controls the total output volume. Turn clockwise to increase.
- Tone: Adjusts high-end frequencies. Turn clockwise to increase high-end.
- Fuzz: Adjusts the amount of fuzz. Turn clockwise to increase.
- Character: Adjusts bias and sputter.
- Chime: Adjusts brightness. Up is bright, middle is dark, down is stock. This control is dependent on the Fuzz control setting.
- Tight: Adjusts bass response. Up is bass heavy, middle is tighter, down is stock.
Power Requirements
To ensure proper operation and avoid damage:
- Use a 9-18V DC power source intended for guitar pedals.
- Do not exceed 18V DC.
- Do not use center-pin positive adapters.
- Do not use AC power.
- The pedal draws approximately 15mA at 9V and 30mA at 18V.
Tips and Tricks
- Character Knob: Works like a bias control. Counterclockwise tightens the sound; clockwise loosens it for a spitty, gated effect.
- Chime Switch: Adjusts highs before clipping. It acts similarly to a presence control. Note that with the Fuzz control all the way up, the Chime switch has no effect.
- Tight Switch: Adjusts bass levels. Middle position provides the least bass, down is moderate, and up is the most bass.
- Signal Chain: For best response, avoid using buffered bypass pedals before the Cryptid.
Suggested Settings
Use these starting points to find your perfect tone:
- Germanium Fuzz Face: Classic vintage fuzz sounds.
- Silicon BC108: A different style of Fuzz Face.
- Muff Fuzz: Style with more mids.
- Misbiased Tone Bender: A specific type of fuzz character.
- Velvet Fuzz Redux: For those who prefer non-traditional fuzz.
- Chimey SRV: Requires no buffer in front, roll guitar volume back, and switch to neck pickup.
Support and Warranty
Wampler offers a 5-year warranty to the original purchaser against defects in material and workmanship. For support, email [email protected] or call (765) 352-8626. Ensure you register your pedal online at wamplerpedals.com/warranty-registration for quicker service.
Official resources from the manual
Practical help
Common problems
Check the Fuzz control setting; the Chime switch is dependent on the Fuzz control position.
Adjust the Character knob clockwise to loosen the bias.
Avoid using buffered bypass pedals before the Cryptid.
Before use
- Ensure power source is 9-18V DC.
- Verify power supply is not center-pin positive.
- Confirm no AC power is used.
- Connect instrument to Input.
- Connect amplifier to Output.
Model compatibility
- Avoid using buffered bypass pedals before this unit for best response.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.