Lighting / Fixtures
Installation Guide for Wayfair 23089LEDDLPFC Hanging Light
Step-by-step installation guide for the Wayfair 23089LEDDLPFC hanging light, including wiring instructions, safety precautions, and recommended dimmer compatibility.
Quick answers from the manual
Quick answer
- The Wayfair 23089LEDDLPFC is a ceiling-mounted hanging light. Installation requires mounting a crossbar to a 4-inch junction box, connecting the wires (black-to-brown, white-to-blue, ground-to-green), attaching the canopy and shade, and installing an A19 E-26 LED bulb. p. 1, 2
Key actions
- Mount the crossbar to the junction box. p. 2
- Connect supply wires to fixture wires. p. 2
First start
- Ensure power is disconnected at the circuit breaker before starting. p. 1
Show 3 more answers Show less
Maintenance and reset
- Ensure the fitting is cool and switched off before replacing the bulb. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb | A19 E-26 LED | Required bulb type | p. 1 |
| Mounting Box | 4-inch metal octagon | Required junction box type | p. 1 |
Where to find it in the PDF
- Safety and General Information p. 1
- Installation Steps p. 2
Table of contents
Quick Guide
This document provides installation instructions for the Wayfair 23089LEDDLPFC hanging light. Before beginning, ensure you have a screwdriver, wire cutters, and appropriate wiring supplies. The fixture is designed for mounting to a standard 4-inch metal octagon outlet box supported by the building structure.
Installation Steps
- Mount Crossbar: Remove any existing fixture. Expose supply wires from the junction box and mount the crossbar using the supplied screws.
- Connect the Wires: Relieve strain, adjust wire length, and connect the black supply wire to the brown fixture wire, the white supply wire to the blue fixture wire, and the ground wire to the green fixture wire. Use wire connectors and UL-listed electrical tape to secure connections. Tuck all wiring back into the outlet box.
- Attach the Fixture: Align the canopy onto the crossbar and secure it with the supplied screws.
- Attach the Glass Shade: Align the shade onto the socket and secure it with the provided socket ring.
- Insert the Bulb: Install the A19 E-26 LED bulb. Do not exceed the maximum wattage stated on the warning label.
- Restore Power: Turn the circuit breaker back on to test the fixture.
Recommended Dimmers
For optimal performance, the following dimmer switches are recommended for this model:
- Lutron Skylark SELV-300P (ELV)
- Cooper Aspire 9530SW (MLV)
- Legrand Titan CD703-PW (TRIAC)
Safety Warnings
- Electrical Shock Hazard: Always disconnect power at the circuit breaker or fuse box before starting installation. Turning off the light switch is not sufficient.
- Fire Hazard: Do not install the fixture in hazardous locations. Maintain a distance of at least 6 inches from curtains or combustible materials.
- Bulb Replacement: Ensure the fitting is cool and switched off before replacing the bulb. Do not exceed the maximum wattage.
Manufacturer information
Wayfair LLC
Practical help
Common problems
Fixture does not turn on after installation
Check that the circuit breaker is on and that all wire connections are secure and not loose.
Dimmer flickering or buzzing
Ensure you are using one of the recommended dimmer models (Lutron SELV-300P, Cooper 9530SW, or Legrand CD703-PW).
Before use
- Disconnect power at the circuit breaker or fuse box.
- Verify the junction box is a standard 4-inch metal octagon box.
- Ensure the junction box is supported by the building structure.
- Have a screwdriver and wire cutters ready.
- Verify you have the correct A19 E-26 LED bulb.
Show more Show less
Model compatibility
- Compatible with ELV, MLV, and TRIAC dimmers.
- Recommended dimmers: Lutron Skylark SELV-300P, Cooper Aspire 9530SW, Legrand Titan CD703-PW.
Manual page author
Emily Carter
User documentation editor