Home Appliances / Refrigerators
User Manual for Whirlpool 24-inch Undercounter Refrigerator
Comprehensive user guide for the Whirlpool 24-inch Undercounter Refrigerator. Includes installation requirements, temperature control settings, maintenance procedures, and troubleshooting tips.
Quick answers from the manual
Quick answer
- The Whirlpool 24-inch Undercounter Refrigerator requires a 115V, 60Hz, 15-20A grounded electrical supply. It features a digital control panel for temperature adjustment (default 39°F/4°C) and requires regular cleaning of the condenser coils located behind the base grille. p. 4, 7, 8, 9
Key actions
- Adjusting temperature p. 7, 8
- Cleaning condenser coils p. 9
First start
- Plug into a grounded 3-prong outlet. p. 4
- Turn on the unit. p. 7
Show 4 more answers Show less
Problems and fixes
Door will not close completely
Rearrange food packages, check shelf position, or clean/wax the gasket.
p. 10Maintenance and reset
- Clean condenser coils every two months. p. 9
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Electrical | 115V, 60Hz, 15-20A | Power supply requirements | p. 4 |
| Temperature Settings | 35°F, 39°F, 43°F | Cold, Medium, Cool settings | p. 8 |
Where to find it in the PDF
- Installation p. 4, 5, 6
- Troubleshooting p. 9, 10
Table of contents
Manual images
Click an image to enlargeQuick Guide
This guide provides essential information for the installation, operation, and maintenance of your Whirlpool 24-inch Undercounter Refrigerator. Always read the safety instructions before beginning any procedure.
Safety
Important Safety Instructions:
- Plug into a grounded 3-prong outlet. Do not remove the ground prong, use an adapter, or an extension cord.
- Disconnect power before servicing.
- Keep flammable materials and vapors, such as gasoline, away from the refrigerator.
- Do not store explosive substances like aerosol cans with flammable propellant inside.
- Use two or more people to move and install the refrigerator.
- Keep ventilation openings clear of obstruction.
- Do not use mechanical devices to accelerate the defrosting process.
Installation
Location Requirements:
- Allow 1/4" (6.35 mm) space on each side and at the top for ventilation.
- If installing next to a fixed wall, leave 2 1/2" (6.35 cm) minimum clearance on the hinge side for the door to swing open.
- Do not install near an oven, radiator, or other heat source.
- Do not install in locations where the temperature falls below 55°F (13°C).
- Ensure the floor is level; shim if necessary.
Electrical Requirements:
- 115 Volt, 60 Hz, AC only, 15- or 20-amp fused, grounded electrical supply is required.
- A separate circuit serving only your refrigerator is recommended.
Operation
Using the Control:
- The control panel is located on the left side of the compartment.
- Turning On/Off: Press the power button for 3 seconds to turn the unit on or off.
- Temperature Settings: Press "+" or "-" to adjust the set point. The default recommended temperature is 39°F (4°C).
- Celsius/Fahrenheit: Press the F°/C° touch pad to toggle between temperature scales.
Maintenance
Cleaning:
- Clean the refrigerator about once a month.
- Unplug the unit before cleaning.
- Use a clean sponge or soft cloth with a mild detergent in warm water.
- Do not use abrasive or harsh cleaners, scouring pads, or flammable fluids.
- To remove odors, wash interior walls with a mixture of warm water and baking soda (2 tbsp to 1 qt of water).
Condenser Cleaning:
- Clean the condenser coils located behind the base grille regularly (every two months) using a vacuum cleaner with an extended attachment.
Troubleshooting
If your refrigerator does not operate, check if it is unplugged, if a household fuse has blown, or if the control is set to OFF. If the motor runs too much, ensure the door is closed completely, the condenser coils are clean, and the unit is not in a hot environment.
Manufacturer information
Whirlpool Corporation
Practical help
Common problems
Refrigerator will not operate
Check if the power cord is plugged in, check for blown fuses/tripped breakers, or ensure the control is not set to OFF.
Motor runs too much
Ensure the door is closed completely, check if the condenser coils are dirty, or if a large amount of food was recently added.
Temperature is too warm
Check if the door is opened frequently, if the base grille is blocked, or if the control settings need adjustment.
Door is difficult to open
Clean the gasket and the surface it touches. Apply a thin coat of paraffin wax to the gasket.
Before use
- Ensure the electrical outlet is grounded and not controlled by a switch.
- Verify the installation location is not near heat sources.
- Clean the interior of the refrigerator before first use.
- Ensure there is proper clearance (1/4" top/sides, 2.5" hinge side).
- Check that the floor is level.
Show more Show less
Specs in practice
- Electrical Supply
- 115 Volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit.
- Default Temperature
- 39°F (4°C) is the recommended setting.
- Temperature Range
- Cold (35°F/2°C), Medium (39°F/4°C), Cool (43°F/6°C).
Images and diagrams
- The base grille is located at the bottom front of the unit and must be removed to access the condenser coils for cleaning.
- The control panel is located on the left interior wall.
Model compatibility
- Designed for household and similar applications (offices, hotels, B&Bs).
- Not intended for outdoor use or extreme temperature environments.
Manual page author
Emily Carter
User documentation editor