User Manual for Wolfbox X3 Pro 2-Channel Dash Cam

Quick guide for the Wolfbox X3 Pro 2-Channel Dash Cam. Includes installation steps, wiring instructions, ADAS setup, Wi-Fi connection, and troubleshooting tips.

Quick answers from the manual

Quick answer

The Wolfbox X3 Pro is a 2-channel dash cam supporting 2.5K recording, GPS, Wi-Fi, and ADAS. Installation requires mounting the front and rear cameras and routing the power cable along the vehicle's A-pillar. p. 1, 23, 24, 25

Key actions

Install SD Card p. 23
Connect to Wi-Fi p. 20
Calibrate ADAS p. 13

Problems and fixes

No GPS signal

Check for interference, move to an open area, and reconnect the probe.

p. 26

Maintenance and reset

Reset the device p. 26

Technical specifications

Parameter	Value	Meaning	Pages
Front Camera	2.5K	Resolution	p. 4
Rear Camera	2.5K	Resolution	p. 4
Display Size	3 inch	Screen size	p. 4

Where to find it in the PDF

Installation p. 23, 24, 25
Troubleshooting p. 26, 27

Table of contents

Quick guide from the manual

The Wolfbox X3 Pro is a 2-channel dash cam designed for vehicle monitoring. Before installation, test the device with all accessories. Ensure you use a Class 10 (10MB/s) micro SD card. For cards larger than 32GB, format them to FAT32 on a PC. The device operates on DC12V/24V vehicle power.

Product Overview

The X3 Pro features a 3-inch IPS display, 2.5K front and rear camera resolution, built-in GPS, and Wi-Fi connectivity. It supports voice control and various driver assistance features.

Installation

SD Card Installation

Ensure the dash cam is powered off before inserting or ejecting the SD card.

Front Camera Installation

Peel off the electrostatic sticker and apply it to the windshield. Attach the front camera to the sticker and press firmly.

Wire Layout In The Vehicle

Connect the car charger to the cigar socket.
Connect the other end to the dash cam.
Use the provided crowbar to route the power cable along the front windshield and roof, hiding it down the A-pillar to avoid obstructing the driver's view.
Connect the rear camera cable and hide it along the gaps between the windshield, ceiling, and car body.

Mount The Rear Camera

Clean the rear windshield, apply the electrostatic sticker, remove air bubbles, and stick the rear camera onto the sticker.

Buttons and Functions

Power Button: Short press for snapshot; long press to turn off.
Menu Button: Short press to enter the main menu.
Left Button: Short press to lock/unlock files; long press to toggle Wi-Fi.
Right Button: Short press to enter playback; long press to toggle audio.
OK Button: Short press to switch screens or confirm settings.

Voice Control

When the white voice control icon is displayed, you can use simple voice commands such as "lock the video," "take picture," "turn on/off audio," "turn on/off screen," "turn on/off WIFI," "turn on/off recording," and "show front/rear camera."

Driver Assistance Feature

The dash cam includes ADAS features: Lane Departure, Forward Collision, and Stop & Go. The system automatically calibrates upon startup. Drive at 20km/h (10mph) or above for 2-3 minutes to complete calibration.

App and Wi-Fi

Download the "WOLFBOX" app. Enable Wi-Fi in the dash cam settings. Connect your phone to the "X3 Pro" Wi-Fi network using the default password "12345678". Open the app to sync and view live video.

Troubleshooting

No GPS signal: Check for interference (metal film, radar detector) and move to an open area.
Card error/Format prompt: Check format reminder settings, format the memory card, or update firmware.
Repeated restart/No boot: Use the original charger, check for short circuits, reset via the reset hole, or try powering via USB.
Wi-Fi connection issues: Ensure you are within 15ft, check SSID/password, and disable mobile data/VPN on your phone.

Practical help

Common problems

No GPS signal

Clean and reconnect the probe on the main unit and bracket. Check for interference like metal film on the windshield or radar detectors. Move the vehicle to an open area.

Card error or frequent format prompts

Check if the format reminder is enabled in settings. Format the memory card, restore factory settings, or update the firmware.

Repeated restarts or failure to boot

Use the original car charger. Unplug the memory card and charger to check for short circuits. Use the reset hole on the side of the device. Try powering via USB cable.

Cannot connect to Wi-Fi

Ensure the phone is within 15ft of the camera. Verify the SSID and password. Turn off mobile data, security software, and VPN on the phone.

Before use

Test functionality with all accessories before permanent installation.
Ensure the dash cam is powered off when inserting or ejecting the SD card.
Use a Class 10 (10MB/s) micro SD card.
Format SD cards larger than 32GB to FAT32 on a PC.
Ensure the vehicle power supply is DC12V/24V.

Specs in practice

Front Camera: 2.5K resolution, 60 fps.
Operating Temperature: -4°F to 158°F.
Power Interface: USB-C.

Images and diagrams

The front camera mounts to the windshield using an electrostatic sticker.
Power cables should be routed along the A-pillar to keep the view clear.
The rear camera is mounted to the rear windshield using an electrostatic sticker and adhesive.

Model compatibility

Parking Mode requires a separate hardware kit (purchased separately).
The included rear camera cable is 20 feet long.

Show more Show less

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.