Lighting / Fixtures
Zevni A04641 Vanity Light Installation Manual
Installation guide for the Zevni A04641 3-Light Vanity Light. Includes safety warnings, wiring instructions, assembly steps, and maintenance tips.
Quick answers from the manual
Quick answer
- This manual provides instructions for installing the Zevni A04641 3-Light Vanity Light, including safety precautions, wiring diagrams, and assembly steps. p. 1, 2, 3
Key actions
- Turn off power p. 1, 2
- Install mounting plate p. 3
First start
- Ensure power is off, prepare tools, mount the plate, connect wires, and attach the fixture. p. 1, 2, 3
Show 3 more answers Show less
Maintenance and reset
- Wipe with a soft cloth; avoid abrasive materials. p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 120V | Operating voltage | p. 1 |
| Max Wattage | 11W | Maximum power consumption | p. 1 |
Where to find it in the PDF
- Safety and Tools p. 1
- Parts and Assembly p. 2
- Wiring and Maintenance p. 3
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides instructions for the safe installation and assembly of the Zevni A04641 3-Light Vanity Light. Before beginning, ensure the electricity is turned off at the main fuse or circuit breaker. The installation should be performed by a licensed electrician. Ensure the mounting surface is clean, dry, flat, and capable of supporting the fixture's weight. The fixture is designed for 120V systems with a maximum wattage of 11W.
Tools Required
Before starting, ensure you have the following tools available:
- Ladder
- Philips Head or Flat Blade Screwdriver
- Electrical Tape
- Pliers
- Wire Cutter/Stripper
Parts List
The package includes the following components:
- Mounting plate (1)
- Green ground screw (1)
- Back plate (1)
- Studs (2)
- Arm (1)
- Lampshades (3)
- Sockets (3)
- Tube-A (2)
- Tube-B (3)
- Mounting screws (2)
- Plastic wire connectors (3)
Assembly and Installation
- Preparation: Turn off power at the main fuse or circuit breaker.
- Step A1: Unscrew studs (F) from the back plate (E) and set them aside.
- Step A2: Pass supply wires from the outlet box through the mounting plate (C). Secure the mounting plate to the outlet box using mounting screws (A).
- Step A3: Make wire connections (see Wiring Instructions).
- Step A4: Align the holes in the back plate (E) with the mounting plate (C) and secure them using the previously removed studs (F).
- Step A5: Screw tube-A (J) and tube-B (K) onto the ends of the arm (G). Screw the lampshades (H) onto the sockets (I).
Wiring Instructions
Warning: The ground wire is bare copper. Never connect other wires to the ground wire.
Connect wires according to the following guidelines:
- Black or Red Supply Wire: Connect to the black fixture wire (or parallel cord round & smooth, or clear/brown/gold/black without tracer).
- White Supply Wire: Connect to the white fixture wire (or parallel cord square & ridged, or clear/brown/gold/black with tracer).
Twist wires together with plastic wire connectors until tightly joined, wrap each connector with electrical tape, and ensure no wire strands are exposed before tucking wires into the outlet box.
Cleaning and Maintenance
To clean the fixture, wipe it with a soft cloth. Do not use abrasive materials such as scouring pads, powders, steel wool, or abrasive paper. Keep the lamp away from acidic and alkaline substances to prevent surface damage. When replacing bulbs, ensure the lamp is turned off or unplugged and allowed to cool completely.
Manufacturer information
ZEVNI
Practical help
Common problems
Fixture surface damage
Keep the lamp away from acidic and alkaline substances.
Bulb replacement safety
Turn off or unplug the lamp and wait until it is cool before replacing bulbs.
Before use
- Turn off electricity at the main fuse or circuit breaker.
- Ensure the mounting surface is clean, dry, flat, and strong enough.
- Verify the mounting surface is at least 1/4 inch larger than the canopy.
- Check that the voltage is 120V.
- Gather required tools: Ladder, Screwdriver, Electrical Tape, Pliers, Wire Cutter.
Show more Show less
Specs in practice
- Maximum Wattage
- 11W
Images and diagrams
- The wiring diagram illustrates how to connect the fixture ground wire to the outlet box ground using the green ground screw.
- The assembly diagram shows the sequence of attaching the mounting plate, back plate, and fixture arms.
Model compatibility
- Installation by a licensed electrician is recommended.
- Ensure the ceiling or wall can support the weight of the lamp.
Manual page author
Michael Turner
Technical manual editor