Electronics / PA Systems
User Guide for Alto Professional TMD16 Digital Mixer
Comprehensive user guide for the Alto Professional TMD16 16-channel digital mixer. Learn how to connect inputs and outputs, navigate the touch display, adjust channel settings, apply FX, manage presets, and pair Bluetooth devices.
Quick answers from the manual
Quick answer
- The Alto Professional TMD16 is a 16-channel digital mixer. It is operated via a touch display and physical knobs to select channels, adjust EQ/FX, manage presets, and connect Bluetooth devices. p. 1
Key actions
- To add FX, select the channel, press SEL, navigate to the FX section, and use the knob to adjust. p. 1
- To save a preset, adjust settings, press FUNCTION, select SAVE, choose a location, and press FUNCTION again. p. 1
- To pair Bluetooth, select the Bluetooth bank, press SEL, press FUNCTION, and select TMD16 Bluetooth on your device. p. 1
First start
- Connect power, inputs, and outputs. Power on the unit. Use BANK and SEL buttons to select channels and adjust settings via the touch display and knobs. p. 1
Where to find it in the PDF
- Package Contents and Connections p. 1
- Features and Operation p. 1
Table of contents
Quick Guide from the Manual
The Alto Professional TMD16 is a 16-channel digital mixer designed for live audio applications. This guide provides instructions on connecting your equipment, navigating the interface, and managing your mix. Always ensure your output devices (speakers/monitors) are turned down before powering on the mixer to prevent audio spikes.
Package Contents
- TMD16 Digital Mixer
- Power Cable
- USB Cable
- Quick Start Guide
Connections
The rear panel provides the following connectivity options:
- Inputs: Channels 1-8 (XLR/TRS), Channels 9-10 (RCA), Channels 11-12 (XLR/TRS), Channels 13-14 (RCA), Channels 15-16 (TRS).
- Outputs: Main L/R (XLR), Sub 1-4 (XLR), Aux 1-3 (XLR), Monitor L/R (TRS).
- Controls: Foot switch (1/4" TS), USB-B/C (Data/Power), Ethernet (Control).
- Power: AC Input and Power Switch.
Features
The mixer features a touch display for navigation and physical knobs for tactile control. The display provides access to channel settings, FX, and system menus. Use the SEL buttons to select channels and the BANK buttons to switch between channel groups.
Operation
Selecting and Adjusting Channels
- Press the BANK SELECT button to choose the channel group (1-6 or 7-16).
- Press the SEL button for the specific channel you wish to adjust.
- Use the KNOB to adjust parameters shown on the display.
Adding FX
- Select the channel you wish to add FX to.
- In the channel settings window, use the KNOB to navigate to the FX section.
- Press the SEL button to open the FX channel.
- Use the KNOB to adjust the FX settings.
Saving a Preset
- Adjust all channel settings (panning, EQ, compression, etc.) as desired.
- Press the FUNCTION button and select SAVE on the screen.
- Use the KNOB to select the location where you want to save the preset.
- Press the FUNCTION button to confirm.
Bluetooth Connection
- Press the BANK SELECT button to navigate to the Bluetooth page.
- Press the SEL button to select Bluetooth.
- Press the FUNCTION button to enter pairing mode.
- On your Bluetooth device, select "TMD16 Bluetooth" from the list of available devices.
Manufacturer information
Alto Professional
Practical help
Common problems
No sound from a specific channel
Ensure the channel is selected using the BANK and SEL buttons, and check that the channel fader is raised.
Bluetooth device not connecting
Ensure the mixer is in Bluetooth pairing mode (via the FUNCTION button) and that your device is within range.
FX not audible
Verify that the FX channel is selected and the FX level is adjusted correctly in the channel settings.
Before use
- Verify the power source matches the mixer requirements.
- Connect all input sources (microphones, instruments) to the appropriate channels.
- Connect output devices (speakers, monitors) to the Main or Monitor outputs.
- Ensure all channel faders are set to minimum before powering on.
- Power on the mixer using the rear switch.
Model compatibility
- Compatible with standard XLR and 1/4 inch TRS audio cables.
- Bluetooth connectivity requires a compatible source device.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.