Power / Batteries & Chargers
Amazon Basics Power Strip Tower B0BGPFTKC4 User Manual
Quick guide for the Amazon Basics Power Strip Tower B0BGPFTKC4. Learn about operation, USB charging limits, circuit breaker reset, and technical specifications.
Quick answers from the manual
Quick answer
- The Amazon Basics Power Strip Tower is designed for indoor use to power up to 12 devices with a maximum load of 1875 W. p. 1
Key actions
- Resetting the circuit breaker p. 1
- Cleaning the unit p. 1
First start
- Connect the power cord to a suitable power outlet and switch the product on. p. 1
Problems and fixes
Circuit breaker trips
Unplug all devices, switch the product off, then switch it back on.
p. 1Maintenance and reset
- Reset the circuit breaker by switching the unit off and on after unplugging devices. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Maximum power output | 1875 W | Maximum load capacity | p. 1 |
| USB total output | 3.4 A | Total current for USB ports | p. 1 |
| Surge energy rating | 1080 J | Surge protection capacity | p. 1 |
Where to find it in the PDF
- User Manual p. 1, 2
Table of contents
Important Information
The Amazon Basics Power Strip Tower is designed for indoor use only. It is intended to power up to 12 devices with a maximum total load of 1875 W. It is not intended for commercial use.
Operation
To use the power strip:
- Connect the power cord to a suitable power outlet.
- Switch the product on. The power indicator lights up.
- Connect external devices or appliances to the product using suitable charging cables and power plugs.
USB Charging: Up to 3 USB devices can be charged simultaneously. The total current output for the USB ports is 3.4 A. If the total current consumption of the devices exceeds 3.4 A, the available current for each device depends on its battery capacity.
Circuit Breaker
If the circuit breaker trips, follow these steps to reset it:
- Unplug all connected devices and appliances.
- Switch the product off.
- Switch the product back on.
- Reconnect the devices and appliances. Do not connect the device or appliance that caused the circuit breaker to trip. Ensure the total load does not exceed 1875 W.
Cleaning and Storage
Cleaning: Unplug the product before cleaning. Wipe the product with a soft, slightly damp cloth. Do not use corrosive detergents, wire brushes, abrasive scourers, metal, or sharp utensils. Do not immerse the product in water or other liquids.
Storage: Store the product in its original packaging in a dry area, away from children and pets.
Technical Specifications
- Rated voltage: 125 V AC, 15 A, 60 Hz
- Maximum power output: 1875 W
- Number of AC outlets: 9 (grounded)
- Cord length: 6' (1.83 m)
- USB output: 3.4 A total
- Surge energy rating: 1080 J
- Protection class: Class I
Practical help
Common problems
Circuit breaker trips
Unplug all devices, switch the product off, then switch it back on. Do not reconnect the device that caused the trip.
USB devices charging slowly
Ensure the total current consumption of all connected USB devices does not exceed 3.4 A.
Before use
- Remove all packaging materials
- Check the product for transport damage
- Ensure the location is indoors and dry
Specs in practice
- Maximum power output
- The total combined power draw of all connected devices must not exceed 1875 W.
- Surge energy rating
- 1080 J indicates the level of protection against power surges.
Model compatibility
- Indoor use only
- Not for commercial use
- USB ports are for audio-video and IT devices only
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.