Lighting / Fixtures
Installation Guide for Artika Mylo 16 LED Vanity Light
Comprehensive installation and safety guide for the Artika Mylo 16 LED Vanity Light. Includes step-by-step mounting instructions, wiring diagrams, dimmer compatibility requirements, and warranty details.
Quick answers from the manual
Quick answer
- The Artika Mylo 16 is an indoor LED vanity light. Installation involves mounting the bracket to the junction box, connecting the wires (Black to L, White to N, Ground to GND), and securing the fixture with canopy screws. Ensure the power is off at the breaker before starting. p. 1, 3, 6
Key actions
- Turn off the main electrical supply at the fuse box or circuit breaker. p. 4
- Connect wires: Black (L) to live, White (N) to neutral, and Ground (GND) to ground. p. 6
First start
- Ensure the power is off at the breaker, install the mounting bracket, connect the wires, and secure the fixture. p. 3, 5, 6, 7
Problems and fixes
Dimmer compatibility
If using a dimmer, it must be LED compatible.
p. 4Where to find it in the PDF
- Included Hardware p. 2
- Installation Steps p. 3, 5, 6, 7
- Safety Warnings p. 4
- Warranty p. 10
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Artika Mylo 16 LED vanity light is designed for indoor, residential use only. Before beginning installation, ensure the main electrical supply is turned off at the circuit breaker. If you intend to use a dimmer switch, it must be specifically compatible with LED lighting to prevent malfunction. Professional installation by a certified electrician is recommended and may be required by local building codes.
Included hardware
- Mounting bracket
- Wire connectors (3)
- Junction box screws (2)
- Canopy screws (4 + 1 extra)
- LED vanity light fixture
Installation steps
1. Mounting bracket installation
Secure the mounting bracket to the junction box using the provided junction box screws. Ensure the bracket is level before tightening.
2. Wiring connection
Connect the fixture wires to the house supply wires using the provided wire connectors:
- Black (L) to the live wire.
- White (N) to the neutral wire.
- Ground wire (GND) to the ground wire.
3. Fixture installation
Align the vanity light fixture with the mounting bracket and secure it using the canopy screws.
ADA installation guidelines
For ADA compliance, the light should be mounted no more than 4 inches from the wall and positioned between 2 feet 4 inches and 6 feet 8 inches above the finished floor.
Compliance and safety
This device complies with Part 15 of the FCC Rules and Industry Canada (IC) regulations. It is designed to provide reasonable protection against harmful interference in residential installations. Do not use this product outdoors.
Warranty
Artika For Living Inc. offers a five-year limited warranty on manufacturing defects for residential use. The warranty is non-transferable and requires the original sales receipt. It does not cover improper installation, misuse, normal wear and tear, or damage caused by chemical cleaning agents.
Customer service
For support, contact Artika For Living Inc. at 1-866-661-9606 or via email at [email protected]. Service is available Monday to Friday, 9 am - 5 pm EST.
Manufacturer information
Artika
Practical help
Common problems
Light flickering or not working correctly
Ensure the dimmer switch used is compatible with LED lighting.
Improper installation
Ensure the product is installed in accordance with local building codes and the provided manual; failure to do so voids the warranty.
Before use
- Turn off the main electrical supply at the circuit breaker.
- Verify the dimmer switch is LED compatible.
- Ensure the installation location is indoors.
- Confirm all hardware (bracket, screws, connectors) is present.
- Check that the mounting surface is suitable.
Specs in practice
- ADA Compliance
- Mounting height must be between 2'4" and 6'8" above the floor, and projection from the wall must be no more than 4 inches.
- Residential Use Only
- The product is not intended for commercial applications or establishments.
Images and diagrams
- The wiring diagram shows the connection of Black (L), White (N), and Ground (GND) wires using wire connectors.
- The mounting bracket diagram illustrates the attachment to the junction box.
Model compatibility
- If using a dimmer, it must be LED compatible.
- Designed for indoor use only.
- Not for commercial use.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.