User Manual for Audibax Haze 1500 Pro Fog Machine

Quick guide for the Audibax Haze 1500 Pro fog machine. Learn how to set up DMX, configure timer settings, operate manual controls, and perform essential maintenance.

Table of contents

Quick guide from the manual

The Audibax Haze 1500 Pro is a professional fog machine designed for indoor use. Before operation, ensure the machine is placed on a stable, non-slip surface and is in an upright position. Use only recommended water-based fluid to prevent damage to the pump and heater. The machine must not be connected to a dimmer or rheostat.

Display and Menu Settings

Use the Menu key to navigate through the settings. Adjust values using the Up/Down keys:

Control panel layout with LCD display and operation buttons.

Man Vol Out: Adjusts manual volume output (0% to 100%).
Interval Set: Sets the interval between fog emissions (1 to 100 seconds).
Duration Set: Sets the duration of each fog emission (1 to 100 seconds).
Volume Out: Sets the fog output volume during timer mode (0% to 100%).
DMX 512: Adjusts the DMX start address.
Wind For Class: Controls fan speed during output.

Operation Modes

Timer Control

Press the Timer key to activate. The display shows the interval countdown. Once it reaches zero, fog emission is triggered based on the 'Volume Out' and 'Duration Set' parameters. Press the Timer key again to deactivate.

Manual Control

Locked: Press the Lock button to trigger fog emission at the volume set under 'Man Volume'. Press again to stop.
100% Output: Press and hold the Manual key for immediate fog emission at 100% volume. Release the key to stop.

DMX-512 Connection

Connect the DMX-output of the controller to the DMX-input of the first unit. Daisy-chain units by connecting the output of one unit to the input of the next. If using a 5-pin DMX controller, use a 5-pin to 3-pin adapter. Ensure the last fixture in the chain is terminated.

Maintenance and Cleaning

To prevent deposits in the machine, pump, and heater, the haze machine must be cleaned after every 40 operating hours. Always drain the fluid tank before transporting or storing the unit.

Safety Precautions

Never aim the smoke output at people, animals, or open flames.
If mounting at height, use the bracket and attach a safety cable.
The installation must be able to hold 10 times the weight of the machine for 1 hour.
Keep out of reach of children.
If fluid contacts skin or eyes, rinse thoroughly with water and seek medical attention.

Practical help

Common problems

Machine not responding

Ensure the machine is not connected to a dimmer or rheostat and that the power supply is stable.

DMX control issues

Check that the DMX address is set correctly and the DMX chain is properly terminated at the last fixture.

Poor fog output or clogging

Ensure you are using only recommended water-based fluid and perform cleaning after 40 hours of operation.

Before use

Place the machine on a stable, non-slip surface.
Ensure the machine is in an upright position.
Check that ventilation slots are not blocked.
Use only recommended water-based fluid.
If mounting at height, attach a safety cable.
Ensure the machine is not connected to a dimmer.

Specs in practice

Interval Set: Time between fog emissions (1-100 seconds).
Duration Set: Length of each fog emission (1-100 seconds).

Images and diagrams

The control panel includes a Menu button for navigation, Up/Down keys for value adjustment, and dedicated buttons for Timer, Lock, and Manual operation.

Model compatibility

Requires water-based fluid only.
Not compatible with dimmers or rheostats.
5-pin DMX controllers require a 5-pin to 3-pin adapter.

Show more Show less

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.