Lighting / Fixtures
Aurora ELumi 12W LED Downlight User Manual
Quick guide for the Aurora ELumi 12W LED Downlight. Includes technical specifications, installation requirements, and warranty information for models AU-DLE412/40, AU-DLE412DA/40, and AU-DLE412V/40.
Table of contents
Quick guide from the manual
The Aurora ELumi 12W is a professional LED downlight designed for new commercial installations or for retrofitting existing fluorescent fixtures. It features an opal diffuser for soft, uniform lighting and is supplied with a remote constant current driver. The series includes three variants based on dimming capability: Non-dimmable, DALI, and 1-10V.
Product Description
The ELumi 12W downlight is built for efficiency and durability. It is constructed from aluminum and polycarbonate, ensuring a robust build suitable for various commercial environments. The unit is designed to be recessed into ceilings with a specific cutout range.
Technical Specifications
- Voltage: 220-240V AC, 50/60Hz
- Power: 12W
- Luminous Flux: 1400 lm
- Color Temperature: 4000K
- IP Rating: IP54 (Protected against dust and splashing water)
- Cutout Diameter: 120mm - 130mm
- Lifespan: 50,000 hours (L80)
- Operating Temperature: -20°C to 40°C
- Beam Angle: 100°
Warranty
This product is covered by a 5-year warranty against defects in design, materials, or manufacturing. The warranty is valid from the date of delivery and requires that any defect be reported within 1 month of occurrence. The warranty does not apply in cases of misuse, improper installation, or if the Q.C. label is damaged. Aurora does not cover installation costs associated with product replacement.
Manufacturer information
Aurora Lighting
Practical help
Common problems
Light not functioning after installation
Verify that the remote driver is correctly connected and that the input voltage is within the 220-240V AC range.
Incompatible dimming
Ensure the specific model (AU-DLE412DA/40 for DALI, AU-DLE412V/40 for 1-10V) matches your control system. The standard AU-DLE412/40 is non-dimmable.
Before use
- Verify the ceiling cutout diameter is between 120mm and 130mm.
- Ensure the power supply is 220-240V AC.
- Confirm the environment is suitable for IP54 rated fixtures.
- Check that the correct dimming model is selected for your control system.
Model compatibility
- AU-DLE412/40: Non-dimmable
- AU-DLE412DA/40: DALI Dimmable
- AU-DLE412V/40: 1-10V Dimmable
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.